1、 Working principle of large-scale softened water equipment

This product uses strong acidic styrene based sodium resin (NaR) to replace the hardness components Ca2+and Mg2+in the raw water, softening the raw water. The reaction is: 2NaR+Ca2+(Mg2+)=R2Ca (Mg)+2Na+. When the resin is replaced with a certain amount of calcium and magnesium, it will lose its displacement ability; It can be soaked in a certain concentration of salt water to restore its exchange capacity, and the reaction equation is: R2Ca (Mg)+2Na+=2NaR+Ca2+(Mg2+). The regeneration process includes: backwashing (loosening the resin layer) - salt absorption slow washing (replacement process) - forward washing (washing away calcium and magnesium ions) - water injection (preparing for the next regeneration).

2、 Characteristics of large-scale softened water equipment

1. The automation level is high, and the fully automatic softening water equipment automatically completes the softening regeneration and other cycle processes according to the pre-set program. Daily operation does not require manual operation except for adding salt.

2. Small footprint, compact device structure, small and lightweight.

3. Strong corrosion resistance, the tank body is made of stainless steel, which can avoid the corrosion of equipment by regenerants.

4. Reliable performance and stable effluent quality.

5. Flexible selection, can choose dual tank or multi tank systems according to needs; Time and flow control methods. Simultaneous regeneration, alternating regeneration and other operating modes.

10 ton softened water system (as shown in the above picture)

1. Pressure: 0.2-0.5MPa, with the optimal range of 0.25-0.35 MPa;
2. Inlet water quality: meets the standards of GB/T18300-2001 Technical Conditions for Automatic Control Sodium Ion Exchangers;
3. Water hardness: ≤ 0.03mmol/L;
4. Raw water temperature: 5-45 ℃;
5. Power supply: AC 220V, 50Hz Power: 3W-40W;
6. Water consumption: ≤ 2%
7. Salt consumption: 0.16-0.24KG/L
8. Regeneration method: co current or counter current
Parameters required for user selection
1. Unit hourly water production (unit: m3/h);
2. Raw water source and its total hardness, total alkalinity, and total salt content;
3. Requirement for effluent hardness (unit: mmol/L);
4. Inlet pressure (unit: MPa), preferably between 0.25-0.35 MPa;

Manufacturing industry:Automotive glass, steel, paper, textile, etc

Power industry:Boiler thermal power generation cooling cycle, etc

Catering industry:Beverages, food, dairy industry, drinking water, hotels, etc

Electroplating industry:Coated lighting, cooling, metal plating, LED lights, etc

Optoelectronic industry:Photovoltaic photovoltaic lighting, new energy LED lights, etc

Electronic industry:Electrical chips, circuit boards, microcontrollers, electronic components, etc

Pharmaceutical industry:Medical devices, oral liquids, finished drugs, biologics, etc

Energy industry:Oxide semiconductor silicon material, polycrystalline silicon metal extraction, etc

How much does a 10 ton per hour softened water system cost

(Specifications we can offer: 0.25T/H, 0.5T/H, 1T/H... 1000T/H, etc.)

Call to inquire：400-9969-506