VIP member
200S type liquefied drying bed
Instrument Introduction: Used for continuous or timed drying of various substances
Product details
Instrument Introduction |
 |
|||||||||
| Used for continuous or timed drying of various substances. An air flow rate exceeding 200 c.f.m can ensure high-quality liquefaction and rapid drying. Air is drawn from a washable large-area filter into the inlet hole. The operator can control the air flow at the hole through a front control panel. The timer can be set for drying times as short as 12 seconds and as long as 12 hours. The electronic temperature controller can adjust the temperature of the surrounding environment to 100 ° C. | ||||||||||
| Main technical parameters | ||||||||||
|
ØHost height:45.7cm ØWidth and Depth:50.8cm Øclean Heavy:30kg Ø100mmDiameter exhaust hole gas pressure:Minimum 3mm wg 39 m³/h； Maximum 93mm wg 367 m³/h ØExtract from the cylinder0.2Air pressure of square meter bag:Minimum 13mm wg; Maximum 200mm wg ØVacuum pump:6mm |
||||||||||
| Place of Origin:Burkard, UK | ||||||||||
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-