532nm seriesMann stable spectrumUSB controlled laser OEM customization
Laser532-1HSUThe center wavelength is at 532nmThe power range is 0-100mWA semiconductor pumped stable spectral laser module designed to meet the requirements of Raman spectroscopy measurement applications. This product is based onDPSSTechnology provides laser output with narrow linewidth, stable spectrum, and stable power required for spectral analysis instruments. built-inPDandTECThe refrigeration module enables the laser module to have good spectral and power characteristics.
The laser is built-inARMdigital controlMCU, achieved digitalizationPIDThe optimized optical coupling design and highly integrated circuit design enableLaser532-1HSUhaveUSBSoftware control function, with power ranging from 0-100MW controlled by software. Simultaneously built-inMCUThe optimized algorithm has achieved high laser power output. The accuracy of laser power design and digital display is within 3%, and the built-in calibration program realizes the function of what customers see is what they get.
characteristic
Semiconductor pumped 532nm laser, small size, low power consumption
narrowLaser output with linewidth, stable spectrum, and stable power
Lifespan up to 5000.00 hours
0~100mW, Laser power adjustable, convenient for customers to operate reasonably for different samples, and more flexible in use
Structural diagram
Parameter indicators
Physical parameters |
|
Overall dimensions: |
180×44×42mm |
Whole machine weight: |
230g |
Specification parameters |
|
Excitation wavelength: |
532 nm ± 0.5 nm, linewidth<0.1nm |
Power stability: |
<3 % RMS (2hrs) |
Laser lifespan: |
5,000.00hrs |
Output power: |
0-100mW adjustable |
Output interface: |
SMA905 |
Preheating time: |
15min |
Power supply voltage: |
5V |
Environmental parameters |
|
Working/storage temperature |
0 ~ 45℃
|
Working/Storage Humidity |
5%-80% |
remarks:
This series of lasers can be coupled with multimode fibers, and there is an SMA905 fiber output interface at the front end of the laser;
Compatible fiber: 105um VIS-NIR Low OH fiber
interface definition
Pin number |
definition |
detailed description |
1 |
ENABLE |
Laser enabled, high level effective |
2 |
GND |
signal ground |
3 |
SERIAL_PORT_TX |
Serial port transmission, default RS232 level |
4 |
SERIAL_PORT_RX |
Serial port reception, default RS232 level |
5 |
GND |
signal ground |
6 |
MONITOR |
Laser power detection output |
7 |
INTERLOCK |
InterLock control, low level effective |
8 |
EX_SET |
Laser power setting |
Laser linewidth and peak wavelength
Power stability