Equipment Name:Cantilever beam mechanical impact testing machine
Equipment model: TCJ-22
Manufacturer: Jilin Taihe Testing Machine Co., Ltd

Cantilever beam mechanical impact testing machineProduct Introduction:

Main purpose: TCJ-22 cantilever beam impact testing machine is a new type of impact testing machine developed by the National Electrochemical Testing and Analysis Center based on domestic and foreign data, which meets the requirements of GB1843-96 standard. This machine is an urgently needed instrument for the research and production process control of impact resistant engineering plastics for domestic vehicles. It can conduct impact tests on metal and non-metal materials, and the factory products are appraised by the National Bureau of Metrology to meet national metrological standards.
Main technical specifications of impact testing machine:

1. Impact energy: 0-22J
Host: Cantilever beam:
Sample width: 4mm-12.7mm
Sample thickness: 12.7 ± 0.15mm
Sample length: 63.5mm
Pendulum impact velocity: V=3.50m/s
Pre elevation angle: 150 °
Distance from the center of the pendulum axis to the center of the specimen: 380mm

2. Accessories for impact testing machine:
2.1. Positioning Instrument (Span Positioning Instrument, Cantilever Beam Sample Positioning Instrument)
2.2. One set of Allen wrench
2.3. Two pieces of support and gasket for cantilever beam span
2.4. Host with four horizontal bases

3. Important safety guidelines for impact testing machines:
Before installing and operating this system, please carefully read all the following instructions and follow all precautions and operating methods.
3.2 Clean the entire machine with a dry cloth and cover it with a cloth to prevent dust.
3.3 Regularly apply a layer of rust proof oil on the hammer head, hammer seat, and their accessories according to the air temperature and humidity conditions.
3.4 This equipment should be placed in a dedicated laboratory and managed by a dedicated person.

4Attention:
4.1. This equipment should be placed in a dedicated laboratory and managed by a dedicated person.
4.2. Horizontal placement, use a level ruler to adjust the level during installation.
4.3 Install the span of the base bracket according to the manufacturer's sample size. Attention: After replacing the pendulum and base, be sure to slowly lower the pendulum so that it passes through the center of the base before it can be used normally.

Product keywords: pendulum impact testing machine; Impact testing machine; Testing machine; Simply supported beam impact testing machine;
Cantilever beam impact testing machine; LCD impact;