Cronet CC-3428 8GE+4GSFP card rail full gigabit network management industrial Ethernet switch-Global supplier

product overview

Cronet CC-3428The network managed industrial Ethernet switch has a high-performance switching engine and adopts a store and forward switching method, which complies with the IEEE802.3/IEEE802.3u/IEEE802.3ab/IEEE802.3z standards. It can provide full line speed non blocking forwarding, 8 10/100/1000M adaptive network ports, and 4 1000M SFP expansion slots. This switch can form a fast recovery self-healing ring network, with a self-healing time of less than 20ms, and supports automatic detection and switching of the ring. Cronet CC-3428 provides rich network management functions, supporting MR ring fast network, compatible with STP/RSTP/MSTP, port based VLAN, 802.1Q based VLAN, QoS, IGMP Snooping, broadcast storm suppression, port aggregation, port mirroring, port status management, SNMP, NTP timing, etc. Specially suitable for building gigabit networks with high bandwidth transmission requirements for video, audio, and other services in fields such as video surveillance, intelligent transportation, and industrial automation. At present, this product is widely used in industrial harsh environments such as intelligent transportation, energy wind power, pipe gallery tunnels, intelligent substations, etc.

Product parameters

attribute	Cronet CC-3428
interface	8A 10/100/1000Mbps adaptive Ethernet interface 4A 1000Mbps SFP expansion slot
Network cable type and distance	Twisted pair cable, supporting a maximum transmission distance of 100m
Optical port attribute	Single mode 1310nm, multi-mode 850nm; single mode 20km, multi-mode 550m (long-distance modules can be customized)
Process type	store and forward
MACAddress table size	Supports 8K MAC addresses Support black hole MAC addresses Support setting the maximum number of port MAC address learning Does it support static multicast MAC?
backplane bandwidth	24Gbps
Packet forwarding rate	17.9Mpps
Package cache	4Mbit
flow control	Supports IEEE802.3x traffic control (full duplex) Support storm suppression based on port rate percentage Support PPS based storm suppression
Ring network redundancy protocol	Support MR ring protocol (self-healing time<20ms)
Spanning-Tree	Support STP/RSTP/MSTP protocol Support STP Root Guard Support BPDU Guard?
VLAN	Support port based VLANs (4094), 802.1Q VLANs Support GVRP
Self healing ring networking method	Support multiple self-healing rings Support tangent rings
Link Aggregation	Support static aggregation, dynamic aggregation, and port aggregation
Jumbo Framejumbo frame	support,The maximum frame length is9K
DHCP	supportDHCP Client
broadcast/Multicast/Unicast storm suppression	Support storm suppression based on port rate percentage
Multicast	Support IGMP Snooping
QoS	Support limiting the rate at which ports receive and send messages, with a granularity of 8Kbit/s Each port supports 8 output queues Supports flexible queue scheduling algorithms that can be set based on both ports and queues, supporting SP, WRR, and SP+WRR
ACL	Provide access control policies based on source MAC address, destination MAC address, source IP (IPv4) address, destination IP (IPv4) address, TCP/UDP port number Support inbound ACL strategy
Port Mirror	Support port mirroring
network security	Support user level management and password protection Support AAA certification Support Radius authentication Supports port isolation
802.1X	Support port based authentication and MAC based authentication
Upgrade and Configuration	Support FTP/TFTP/WEB upgrade, logging, configuration file download and upload
Alarm output	Support power alarm Support relay alarm
protect	Support protection against short circuit/overload/overvoltage/high temperature
manage	Support command-line interface (CLI) configuration Support Telnet remote configuration Support configuration through Console port Support SNMP Support IXM fast automatic deployment function
maintenance	Support Ping Support Telnet remote maintenance
pilot lamp	Power indicator: P1, P2, interface light indicator: ALarm, RUN, G9, G10, G11, G12
power supply	Input voltage: DC12/48V, AC/DC85-265V optional Support power supply 1+1 redundant configuration Support power loss alarm function (DC12V/DC48V) Support power anti reverse protection Industrial Phoenix Terminal Wiring Power 60W
work environment	Working temperature: -40 ℃ to+85 ℃ Storage temperature:-40℃～85℃ Relative humidity:5%~95% no condensation
Installation method	DINCard rail or wall mounted
External dimensions	Width x Height x Depth: 55.5 x 154.5 x 127.5mm
protection grade	IP40provide againstProtection, etcGrade, fanless design, natural air convection cooling
MTBF	350000h
Warranty period	5year
Compliant with standards	IEEE802.3：CSMA/CD IEEE802.3i：10Base-T IEEE802.3u：100Base-T IEEE 802.3adLink aggregation IEEE 802.3xFull duplex Ethernet data link layer flow control IEEE 802.1pTraffic priority IEEE 802.1Q：VLAN IEEE 802.1wQuickly generate trees IEEE 802.1XPort based network access control IEEE 802.1abLink Layer Discovery Protocol
EMI	Electromagnetic interference level test
EMC	IEC61000-4-2(ESD)±8kV(contact),±15kV(air) IEC61000-4-3(RS) 10V/m(80MHz～2GHz) IEC61000-4-4(EFT) Power Port:±4kV;Data Port:±2kV IEC61000-4-5(Surge) Power Port:±2kV/DM,±4kV/CM; Data Port:±2kV IEC61000-4-6(CS) 3V(10kHz～150kHz); 10V(150kHz～80MHz) IEC61000-4-16(Common mode conduction: 30V (cont.), 300V (1s)

attribute	Cronet CC-3428
interface	8A 10/100/1000Mbps adaptive Ethernet interface 4A 1000Mbps SFP expansion slot
Network cable type and distance	Twisted pair cable, supporting a maximum transmission distance of 100m
Optical port attribute	Single mode 1310nm, multi-mode 850nm; single mode 20km, multi-mode 550m (long-distance modules can be customized)
Process type	store and forward
MACAddress table size	Supports 8K MAC addresses Support black hole MAC addresses Support setting the maximum number of port MAC address learning Does it support static multicast MAC?
backplane bandwidth	24Gbps
Packet forwarding rate	17.9Mpps
Package cache	4Mbit
flow control	Supports IEEE802.3x traffic control (full duplex) Support storm suppression based on port rate percentage Support PPS based storm suppression
Ring network redundancy protocol	Support MR ring protocol (self-healing time<20ms)
Spanning-Tree	Support STP/RSTP/MSTP protocol Support STP Root Guard Support BPDU Guard?
VLAN	Support port based VLANs (4094), 802.1Q VLANs Support GVRP
Self healing ring networking method	Support multiple self-healing rings Support tangent rings
Link Aggregation	Support static aggregation, dynamic aggregation, and port aggregation
Jumbo Framejumbo frame	support,The maximum frame length is9K
DHCP	supportDHCP Client
broadcast/Multicast/Unicast storm suppression	Support storm suppression based on port rate percentage
Multicast	Support IGMP Snooping
QoS	Support limiting the rate at which ports receive and send messages, with a granularity of 8Kbit/s Each port supports 8 output queues Supports flexible queue scheduling algorithms that can be set based on both ports and queues, supporting SP, WRR, and SP+WRR
ACL	Provide access control policies based on source MAC address, destination MAC address, source IP (IPv4) address, destination IP (IPv4) address, TCP/UDP port number Support inbound ACL strategy
Port Mirror	Support port mirroring
network security	Support user level management and password protection Support AAA certification Support Radius authentication Supports port isolation
802.1X	Support port based authentication and MAC based authentication
Upgrade and Configuration	Support FTP/TFTP/WEB upgrade, logging, configuration file download and upload
Alarm output	Support power alarm Support relay alarm
protect	Support protection against short circuit/overload/overvoltage/high temperature
manage	Support command-line interface (CLI) configuration Support Telnet remote configuration Support configuration through Console port Support SNMP Support IXM fast automatic deployment function
maintenance	Support Ping Support Telnet remote maintenance
pilot lamp	Power indicator: P1, P2, interface light indicator: ALarm, RUN, G9, G10, G11, G12
power supply	Input voltage: DC12/48V, AC/DC85-265V optional Support power supply 1+1 redundant configuration Support power loss alarm function (DC12V/DC48V) Support power anti reverse protection Industrial Phoenix Terminal Wiring Power 60W
work environment	Working temperature: -40 ℃ to+85 ℃ Storage temperature:-40℃～85℃ Relative humidity:5%~95% no condensation
Installation method	DINCard rail or wall mounted
External dimensions	Width x Height x Depth: 55.5 x 154.5 x 127.5mm
protection grade	IP40provide againstProtection, etcGrade, fanless design, natural air convection cooling
MTBF	350000h
Warranty period	5year
Compliant with standards	IEEE802.3：CSMA/CD IEEE802.3i：10Base-T IEEE802.3u：100Base-T IEEE 802.3adLink aggregation IEEE 802.3xFull duplex Ethernet data link layer flow control IEEE 802.1pTraffic priority IEEE 802.1Q：VLAN IEEE 802.1wQuickly generate trees IEEE 802.1XPort based network access control IEEE 802.1abLink Layer Discovery Protocol
EMI	Electromagnetic interference level test
EMC	IEC61000-4-2(ESD)±8kV(contact),±15kV(air) IEC61000-4-3(RS) 10V/m(80MHz～2GHz) IEC61000-4-4(EFT) Power Port:±4kV;Data Port:±2kV IEC61000-4-5(Surge) Power Port:±2kV/DM,±4kV/CM; Data Port:±2kV IEC61000-4-6(CS) 3V(10kHz～150kHz); 10V(150kHz～80MHz) IEC61000-4-16(Common mode conduction: 30V (cont.), 300V (1s)

Installation size