HG08-Z-6 Integrated Intelligent Distillation Instrument

The integrated intelligent distillation apparatus is a new type of intelligent distillation treatment device that integrates constant temperature heating, automatic control of distillation endpoint, and cooling water circulation according to the laboratory distillation pretreatment operating procedures. This instrument has achieved functions such as precise temperature control, automatic anti backflow suction, uniform heating, anti boiling, and intelligent endpoint control. Easy to use, energy-saving and environmentally friendly. After laboratory distillation recovery rate comparison verification, the results are accurate and reliable, with a recovery rate of95%above.

This instrument is suitable for various chemical laboratories that require distillation treatment, such as environmental protection, disease control, aquaculture, water supply and drainage, universities, research institutes, factories, and mining enterprises. It can be used for distillation treatment of volatile phenols, cyanides, ammonia nitrogen, and moisture in Kjeldahl nitrogen oil.

Main technical indicators:

1Heating method: Using imported far-infrared ceramic heating furnace, infrared radiation heating (no open flame heating, waterproof), equipped with insulation system to ensure heat loss, the sample is heated more evenly.

2. Heating unit:6individual,Single hole single control;

3. Heating time:5-10min；

4. Distillation speed:3-12ml/min；

※5Distillation endpoint control: automatic detection of distillation endpoint function, using pressure sensing and time dual control, distillation volume1-500ml±2mlAfter the distillation is completed, a light alarm is triggered with a high degree of automation;

6. Single furnace heating power:100W-800W(Single hole adjustable);

7. Maximum heating power:2400W-4800W(Adjustable);

8. Cooling power: Input power ≤800WCooling power ≥2000W；

9. Cooling method: Closed internal circulation reflux system, built-in compressor cooling and air cooling, no need for external cooling water source, and separate cooling and heating areas for good cooling effect and easy cleaning;

10. Anti reverse suction: equipped with anti vacuum solenoid valve, with anti reverse suction function;

11. Receiving device: The default configuration is for volumetric flask receiving, which can be replaced with other containers according to experimental requirements. The tray can be flexibly configured;

12. Time control:0-210minAdjustable;

13. Distillation flask specifications:500mlX6，250 X6Or more specifications to choose from;

14. Rated voltage/Frequency:220V/50HZ；