Introduction to synchronous wheels: They are usually made of materials such as 45 # steel, aluminum alloy, copper, nylon, etc., and processed from these materials.Widely used in machine tools, textiles, printing, food packaging, wires and cables, instruments and meters, kerosene chemical industry, and tobacco industryIn the new machine belt drive of various industries such as communication.Specification of synchronous wheel: ① trapezoidal teeth② T-shaped synchronous belt pulley, ③ HTD (STD) synchronous belt pulley.

Characteristics of synchronous belt pulley: (1) Correct transmission, no sliding during operation, and constant transmission ratio; (2) Stable transmission, with buffering and vibration reduction capabilities, and low noise; (3) The transmission obeys high, reaching 0.98, with significant energy-saving results; (4) Easy maintenance and upkeep, no need for lubrication, low maintenance cost; (5) The speed ratio range is large, with synchronous wheel models typically reaching up to 10 and a line speed of up to 50m/s. It has a large power reporting range, ranging from a few watts to several hundred kilowatts; (6) Can be used for long-distance transmission, with a distance of up to 10m or more; (7) No pollution, can be used normally in situations where pollution is not allowed and the situation is relatively harsh.

Dongguan Wanfu Hardware Products Co., Ltd. has nearly 50 gear production and processing equipment, with an annual output of about 10 million pieces. Our company has won customers from Japan, the United States, Germany, Hong Kong, Taiwan, and mainland China with excellent quality, fast delivery, and reasonable prices, and has received high praise from customers.

Research on synchronous belt wheels by domestic and foreign peers

Due to the uneven distribution of load on the meshing teeth of synchronous belts during operation, which has a significant impact on the lifespan of the belts, it has received attention from scholars around the world. Currently, a large proportion of research on synchronous belt transmission has been published, including G. Jebel from Switzerland, synchronous wheel manufacturers, Toshio Koyama and Sadao Tsunashima from Japan, and the Soviet UnionGorevich, Gozevnikov, and others have conducted theoretical and experimental studies on the load distribution between belt teeth.

The characteristics of synchronous belt transmission are a relatively new research topic. Japanese scholars Masanori Kanetani and others analyzed the transmission characteristics of synchronous belts, synchronous wheel parameters, and the meshing process of belt teeth and gear teeth from multiple aspects such as initial tension, rotational transmission error, and jumping phenomenon of synchronous belts. They also used high-speed photography to capture the meshing process of belt teeth and gear teeth, and published multiple documents.

The study of synchronous belt tooth profile focuses on the structural design of circular arc tooth profile. Scholars from countries such as the UK, Japan, and Germany have demonstrated the superiority of their proposed circular tooth profile in terms of strength, eliminating meshing interference, reducing vibration, noise, and other aspects; Sex, currently these discussions are mostly published in patent form.

Synchronous belt pulley: In the following situations, the vehicle must be stopped:

When leaving the workplace;

When installing and adjusting workpieces, cutting tools, measuring dimensions, aligning templates, and checking smoothness;

3. When cleaning the iron filings on the planer or when the equipment is not functioning properly;

When checking the lubrication condition of the guide rail;

5. When lifting the crossbeam, the clamping device must be loosened first, and then clamped. After the horizontal joint beam is lowered, the crossbeam must be lifted a little more to eliminate the gap between the crossbeam lifting screw and nut;

Before and during the operation of the machine tool, attention should be paid to the height between the workpiece, fixture, tool, and tool holder to avoid collisions and accidents. The smaller the length of the extended slide of the cutting tool and tool holder, the better;

When assembling and disassembling workpieces, it is necessary to cooperate well with the crane operator and pay attention to equipment safety and personal safety;

8. Pay attention to whether the protective plate of the workbench is properly fixed and the Liaoning synchronous wheel is used to prevent metal powder and shavings from falling onto the sliding surface and damaging the guide rail;

9. When the workbench is running, it is not allowed to remove shavings and other items on the table to prevent them from falling into the bed and damaging the machine tool rails and gears;

When the machine tool malfunctions or is abnormal, it should be stopped immediately for troubleshooting or maintenance personnel should be notified for inspection.

Dongguan Wanfu Hardware Products Co., Ltd. has strong strength and reliable reputation. It has accumulated a large number of loyal customers in the gear and other industries in Dongguan, Guangdong. The company's pursuit of excellence and continuous improvement of innovative concepts will lead Wanfu Hardware and you to step into glory and create a better future together!

Synchronous Wheel Parameters - Wanfu, Synchronous Belt Wheel National Standard - Liaoning Synchronous Wheel is provided by Dongguan Wanfu Hardware Products Co., Ltd. Dongguan Wanfu Hardware Products Co., Ltd. is an enterprise engaged in "gearboxes, screws, worms, pulleys, internal gears, gears, worm gears, precision shafts, and shaft sleeves". The company adheres to the concept of "honest management and attentive service" and provides you with high-quality products and services. Welcome to call for consultation! Contact person: Ms. Wu.