Halogen Moisture Content Tester _ Moisture Content Tester _ Moisture Content Measurement Instrument Application Fields:

Jingtai brand JT-K seriesMoisture content detectorApplied to industries that require rapid determination of moisture, any particle, powder, sheet, or non-volatile liquid can be measured, such as the pharmaceutical industry, chemical industry, electronics and semiconductor industry, plastic raw materials, rubber, tobacco, tea, food, starch, feed, coal, molding sand, sewage sludge, dairy industry, and so on. The JT-K series moisture analyzer is an ideal choice for measuring moisture in the production process of enterprises and laboratories.

Working principle of halogen moisture content detector, moisture content tester, and moisture content measuring instrument:
Traditional moisture determination generally uses oven drying method, which takes two to three or even three to four hours to test a sample, and also requires weighing with a balance and manual calculation to obtain the moisture value (moisture content) of the sample. The low efficiency of oven method for moisture determination cannot meet the fast-paced production needs of enterprises. The Jingtai JT-K series rapid moisture analyzer is a newly developed rapid moisture analyzer by Taizhou Jingtai Instrument Co., Ltd. It uses a high-power drying heater ring halogen lamp to quickly and uniformly heat the sample, and the moisture content of the sample is continuously dried. Throughout the measurement process, the instrument automatically displays the measurement results in real-time, including sample weight, moisture content, solid content, measurement time, heating temperature, etc.

Jingtai brand JT-K seriesHalogen rapid moisture analyzerThe principle of oven drying method was applied, and the measurement results showed good consistency with the moisture determination by oven method, but the work efficiency was much higher than that of oven method moisture determination. By using the Jingtai brand JT-K series rapid moisture analyzer, samples can generally be measured in just a few minutes, which has been favored and praised by a large number of users.

Moisture content measurer_Moisture content measurer_Moisture content measuring instrument Technical parameters:

Moisture content measurement range: 0.01% -99%

Solid content determination range: 99% -0.01%

Larger weight: 110g

Weighing accuracy: 0.005g

Moisture content readability: 0.01%

Heating temperature: 40-200 ℃

Display content: moisture content, solid content, time, temperature, weight

Display mode: LCD screen with backlight source

Weighing sensor: German imported sensor to ensure measurement accuracy

Temperature sensor: High precision PT100 platinum thermistor

Power supply: Voltage 220V ± 10%, Frequency 50HZ ± 1HZ

Weighing tray size: diameter 90mm

Working environment temperature: 5 ℃ -35 ℃ is better

Dimensions: 380mm × 200mm × 180mm

Net weight: 5.8kg

Operation steps of Jingtai brand halogen moisture content tester:

Many customers have inquired about how to operate the JT-K series halogen moisture content tester and whether the operation is cumbersome.

The JT-K series halogen rapid moisture analyzer from Jingtai brand is a high-tech moisture analyzer that provides highly accurate measurement data. It is extremely easy to use and does not require special training. The operation steps are as follows:

Firstly, evenly place the sample to be tested into the sample tray, then cover it with a heating cover, and finally press the "start" button. The remaining work is automatically completed by the instrument. After the measurement is completed, the instrument will automatically sound an alarm, and the measurement result will be locked on the LCD display screen.