Product Overview:
Electric oven, also known as explosion-proof oven, releases a large amount of hydrocarbon atmosphere during the heating process. Once there is an open flame or cigarette butts entering the box during the heating process, it will explode. This motor oven mainly overcomes the above-mentioned phenomena and is equipped with explosion-proof devices. It is a professionally designed equipment for the motor industry. Widely used for motor impregnation, transformer impregnation, plastic grease hardening, enameled wire curing, and motor rotor drying. The working temperature of the box can be raised from room temperature of 10 degrees to a maximum temperature of 200 degrees. Within this range, the desired temperature can be arbitrarily selected, which is safe and reliable. After constant temperature, the electrical control system can automatically control the temperature.

characteristic
1. The unique hot air circulation system ensures even temperature distribution in the studio.
2. The full process high air volume ventilation method and unique pre ventilation function ensure that the concentration of combustible gases immersed in paint inside the box is always within a safe range.
3. Low temperature sealed electric heating tube with stable performance and long service life.
4. The trolley is equipped with tracks and a manual or electric trolley for loading workpieces or specimens, with high work efficiency.
6. Explosion proof device and unique pressure relief door design can reduce the losses caused by accidents.
7. Heating device, using high-temperature heating tube, no open flame heating, easy maintenance of motor oven.
8. High precision intelligent digital programmable temperature controller for temperature control, with PID parameter self-tuning, can intelligently adjust parameters according to process needs.
9. The over temperature protection device can emit sound and light alarm signals and cut off the heating power supply, protecting the safety of equipment and workpieces.

precautions
1. It should be equipped with explosion-proof devices and a fast pressure relief door design to reduce the losses caused by accidents.
2. The heating element cannot be placed at the bottom, because when the motor oven is immersed in paint, droplets on the heating element will burn.
3. The motor oven must have exhaust and air inlet adjustment devices.
4. Before use, check the electrical insulation performance and ensure that the metal casing is reliably grounded for protection.
5. The full process high air volume ventilation method and unique pre ventilation function, along with the hot air circulation system, ensure even temperature distribution in the workspace.
6. Equipped with an over temperature alarm device.

Technical parameters: