In humid weather conditions, PTFE insulation seats are customized, and dirty insulators are prone to flashover discharge, so they must be cleaned thoroughly. The original insulation level is generally cleaned once a year in general areas, twice a year in polluted areas, and once before the fog season. Dongguan Wanfu Wujin Products Co., Ltd. will now explain the maintenance and management of insulators.

1. Power outage cleaning: It means that after a power outage, workers climb onto the pole and wipe it with a cloth. If it cannot be cleaned, they can use a damp cloth or detergent. If it still cannot be cleaned, the insulator or composite insulator should be replaced;

2. Uninterrupted cleaning: Generally, insulation rods equipped with brushes or tied with cotton yarn are used to wipe insulators on the operating lines;

3. Electric water flushing: There are two methods: large water flushing and small water flushing. The flushing water, effective length of the operating rod, and distance between the person and the live part must comply with the requirements of the industry regulations.

Dongguan Wanfu Hardware Products Co., Ltd. has nearly 50 gear production and processing equipment, with an annual output of about 10 million pieces. It passed the ISO9001:2000 quality management certification on January 9, 2006 and the ISO14001:2004 environmental management system on September 5, 2008. Our company has won customers from Japan, the United States, Germany, Hong Kong, Taiwan, and mainland China with excellent quality, fast delivery, reasonable prices, and PTFE insulation seat manufacturers, and has been highly praised by customers.

High voltage line rigid insulators include needle type porcelain insulators, porcelain cross arm insulators, and butterfly type porcelain insulators. When in use, they are directly fixed to the tower with the steel feet or bolts of the insulator itself. According to the structural form, they can be divided into four types: all ceramic, adhesive, single arm, and V-shaped; According to the installation form, it can be divided into two types: upright and horizontal; According to the standard lightning impulse full wave withstand voltage, it can be divided into four levels: 165kV, 185kV, 250kV, and 265kV.

Butterfly porcelain insulators for high-voltage transmission lines are divided into two levels according to their rated voltage: 6kV and 10kV. They are used as insulation and fixed conductors on overhead transmission and distribution line terminals, tension and corner poles, and are also widely used in conjunction with line suspension insulators to simplify hardware structures.

Dongguan Wanfu Hardware Products Co., Ltd. has nearly 50 gear production and processing equipment, with an annual output of about 10 million pieces. It passed the ISO9001:2000 quality management certification on January 9, 2006 and the ISO14001:2004 environmental management system on September 5, 2008. Our company has won customers from Japan, the United States, Germany, Hong Kong, Taiwan, and mainland China with excellent quality, fast delivery, and reasonable prices, and has been highly praised by customers.

The axial tensile strength of the fiberglass core rod used in composite insulators is very high, generally above 600MPa, which is 5-10 times that of porcelain and comparable to the strength of excellent carbon steel. The PTFE insulation seat, in addition, the specific gravity of the core rod material is only 2.0, much lighter than steel, and the specific gravity of the umbrella skirt material is also less than 2.0.

Composite insulators can be easily manufactured with a strength level of several hundred kilonewtons for specified mechanical loads, and their quality is only 10% to 15% of that of disc-shaped suspension insulators. In the construction and emergency repair of high voltage lines in mountainous areas, composite insulation has the advantages of light weight, no fear of falling and damage, and is highly welcomed by operators and construction personnel.

Dongguan Wanfu Hardware Products Co., Ltd. passed the ISO9001:2000 quality management certification on January 9, 2006, and the ISO14001:2004 environmental management system on September 5, 2008. As a PTFE insulation seat manufacturer, our company has won customers from Japan, the United States, Germany, Hong Kong, Taiwan, and mainland China with excellent quality, fast delivery, and reasonable prices, and has received high praise from customers.

PTFE Insulation Seat Customization - PTFE Insulation Seat - Wanfu Hardware, Low Voltage Seals Provided by Dongguan Wanfu Hardware Products Co., Ltd. Dongguan Wanfu Hardware Products Co., Ltd. () has excellent services and products, constantly receiving recognition and trust from new and old users as well as industry insiders. Our company is a certified member of the All Network Business Alliance. By clicking on the Business Alliance * * * icon on the page, you can directly communicate with our * * * personnel. We hope our future cooperation is pleasant!