The advantages of Jingtai brand laboratory instruments for measuring moisture content are:

1. No installation or debugging required, can be used after unpacking;

2. Adopting a circular halogen lamp heating source;

2. No need for training, simple operation, saving tedious usage steps;

3. Short measurement time, fast detection speed, and high work efficiency;

4. Uniform heating, stable performance, and accurate testing;

5. The halogen moisture analyzer has a small volume and light weight;

6. Fully automatic measurement, alarm reminder after measurement completion, no need to supervise the measurement process;

7. Widely used and almost applicable for moisture determination in various industries;

8. German imported sensors make instrument testing more effective and accurate;

9. The exquisite windproof cover design makes the instrument weighing system more stable;

10. The moisture and solid content of the sample can be converted simultaneously;

11. The heating chamber adopts a pure stainless steel chamber cover, which is heat-resistant and easy to clean.

12. The standard interface of the halogen moisture analyzer can be connected to peripheral devices such as computers. The instrument is easy to operate, accurate in testing, and displays clear and visible values for moisture content, initial and final sample values, measurement time, initial and final temperature values, and other data. And it has the function of connecting with computers and printers.

The Jingtai brand halogen rapid moisture analyzer is reasonably priced and widely applicable for moisture determination of products in various industries (excluding trace amounts of moisture), such as food, grain, chemical industry, Chinese herbal medicine, Western medicine, feed, injection molding, tea, tobacco, rubber, coal, starch, flour, sewage sludge, etc. The JT-K8 universal halogen moisture analyzer is a laboratory moisture analyzer that is beneficial in the production process of enterprises.

The principle of the moisture content testing instrument heated by halogen lamps:

The principle of oven drying method was applied, and the measurement results showed good consistency with the moisture determination by oven method, but the work efficiency was much higher than that of oven method moisture determination. Using the JT-K series halogen lamp heating moisture content testing instrument from Jingtai brand, the sample can be measured in just a few minutes. As a manufacturer of halogen rapid moisture analyzer, the "Jingtai" brand has been favored and praised by a large number of users.

Rapid determination instrument for halogen moisture contentAdvantages:

Traditional moisture determination generally uses oven drying method, which takes two to three or even three to four hours to test a sample, and also requires weighing with a balance and manual calculation to obtain the moisture value (moisture content) of the sample. The low efficiency of oven method for moisture determination cannot meet the fast-paced production needs of enterprises.

The JT-K series halogen rapid moisture analyzer from Jingtai brand is a newly developed rapid moisture analyzer by Taizhou Jingtai Instrument Co., Ltd. It uses a high-power drying heater ring halogen lamp to quickly and uniformly heat the sample, and the moisture content of the sample is continuously dried. Throughout the measurement process, the instrument automatically displays the measurement results in real-time, including sample weight, moisture content, solid content, measurement time, heating temperature, etc.

Halogen rapid moisture analyzerOperation steps:

The JT-K8 halogen moisture analyzer, after careful programming of the core software program, demonstrates very user-friendly operation functions, even if it is not in the laboratory Operators do not require special training and can easily operate and use it. Firstly, evenly place the sample to be tested into the sample tray, then cover it with a heating cover, and finally press the "start" button. The remaining work is automatically completed by the instrument. After the measurement is completed, the instrument will automatically sound an alarm, and the measurement result will be locked on the LCD display screen. Secondly, this type of halogen moisture analyzer is also positioned moderately in terms of price, which can meet the general needs of enterprise users. It is truly a practical and widely applicable universal halogen moisture analyzer in the industry.

Halogen rapid moisture analyzerTechnical parameters:

Moisture content measurement range: 0.01% -99%

Solid content determination range: 99% -0.01%

Larger weight: 110g

Weighing accuracy: 0.002g

Moisture content readability: 0.01%

Heating temperature: 40-200 ℃

Display content: moisture content, solid content, time, temperature, weight

Display mode: LCD screen with backlight source

Weighing sensor: German imported sensor to ensure measurement accuracy

Temperature sensor: High precision PT100 platinum thermistor

Power supply: Voltage 220V ± 10%, Frequency 50HZ ± 1HZ

Weighing tray size: diameter 90mm

Working environment temperature: 5 ℃ -35 ℃ is better

Dimensions: 380mm × 200mm × 180mm
Net weight: 5.8kg