Rocker arm online film wrapping packaging machine YK1800FR-PL-DM

twineWinding specification: (L * W * H) mm 1200 * 1200 * 1800

Packaging efficiency: 20~40 pallets/hour

Conveyor height: 500mm (350-700mm)

Cantilever speed: 0-15rpm

Membrane frame mechanism: pre stretched membrane frame

Power voltage: 3.5KW, AC220V

Dimensions: (L * W * H) 4700 * 2600 * 3900 (including four column frame andThin film storage facility）

Packaging material: wrapping film

Machine weight: 1t

²PLC programmable control, winding program optional, various parameters adjustable.

²The photoelectric switch automatically senses the height of the goods.

²Prominent flashing safety warning lights and emergency stop switches.

²Pre stretching automatic film feeding mechanism.

²Cantilever slow start, slow stop, automatic reset.

²The top and bottom winding numbers are separately controlled.

²Automatic and manual can be switched, requiring almost no daily maintenance.

²The electrical and wiring devices of the entire machine are made of well-known domestic and foreign manufacturers' brands, and must all pass CE safety certification in order to be qualified to supply our company without any safety hazards.

²The whole machine adopts a multifunctional human-machine interface touch display system and PLC control, with a large display screen that can display the real-time operation status of the equipment; A powerful fault detection system that can display real-time fault information and guide maintenance personnel on how to troubleshoot.

Rocker arm system:

²The cantilever variable frequency speed regulation can be adjusted from 6 to 18 turns per minute.

²The cantilever automatically resets.

²Cantilever safety touch automatic shutdown.

²Cantilever quick loading and unloading method.

²The cantilever can be folded for convenient transportation.

²Cantilever integral slewing support structure.

²Install an overall anti fall protection device on the cantilever to prevent it from falling off and falling to the ground.

Membrane rack system:

²The rising and falling speed of the membrane rack can be adjusted separately.

²Adjustable film delivery speed; Individual variable frequency AC motor control.

²The top and bottom winding numbers are separately controlled.

²The membrane system follow-up mechanism can be easily pulled.

²The membrane frame is made of pure cast iron, lightweight and stable.

²Choose wear-resistant rubber rollers for long service life.

²Automatic film breaking system, automatic film clamping, film breaking, hot pressing, and gas synthesis.

²The film frame system is a brand new patented pre stretched film frame, which saves at least 50% of packaging material costs compared to ordinary film frames;

²The safety performance of the membrane frame is higher. The overall lifting and lowering of the membrane frame adopts a wheel car type, with 8 nylon rollers built-in to guide sliding, increasing safety. At the same time, the service life is more than 5 times longer than that of ordinary nylon U-shaped card type; This design is currently applying for a national utility model patent (patent number:ZL 2014 2 0011227.1）；

²The ends of the membrane frame that rise and fall are both equipped with dual limit protection to prevent major damage to the body itself in case of program errors.

Broken film system:

²Use heating wire to break the film.

²After the film is broken, a heat sealed fusion film tail is used without leaving a tail.

²Before the film is broken, the clamping mechanism first pulls the wrapped film down by about 200mm to make the hot pressing point more secure and aesthetically pleasing.

²Blowing device: When the packaging is started, the tail clamped by the film clamping mechanism will be released. At this time, the blowing device is activated to blow up the tail of the film, and use the rotating wrapping film to wrap the tail without leaving any tail film.

²When the wrapping film breaks or there is no film during the packaging process, an automatic shutdown alarm will be triggered.

Coating system:

²We use PE sheet roll film that is 300mm wider than the width of the goods, with a standard width of 1500mm and a thickness of 0.6mm. The film covering each time is cut by a film breaking device based on the size of the goods, intelligently measuring the required size of the pallet, and then placed on top of the goods.

²The top covering film rack is installed on the outside of the column, and is assisted by a free roller and a simple brake device to allow the roll film to retract freely. When releasing the film, the upper clamping cylinder is released, and the film pulling mechanism rises. After the film pulling is completed, the clamping cylinder clamps the PE film, and the heating wire is powered on to cut off the film.

²The film breaking device is completed by a combination of pneumatic and electric heating devices. After the film is broken, the pneumatic film clamping robot holds the top film, and then the frame rises to automatically measure the height of the goods and move horizontally. The photoelectric system then measures the width of the goods and places the top film at the top of the goods. Through cantilever winding, the top film and goods are fixed together to form a waterproof all-round packaging. This mechanism is jointly controlled by motors and pneumatics.

²The lifting mechanism adopts a worm gear reduction motor and frequency converter control. The lifting frame is fixed on the inside of two columns, and the guiding sliding device adopts a linear guide rail type, which runs stably, self-lubricating, and noise free. The translation mechanism adopts upper and lower square tube guidance, and is made of high-strength and wear-resistant nylon roller sliding rod, which is durable and easy to install.

The rocker arm online film wrapping packaging machine is equipped with a top peritoneum mechanism and a film storage mechanism, which can perform top peritoneum treatment on products. Provide better protection for products during transportation and storage.Mainly suitable for wrapping lighter, higher, and unstable products or heavier goods after stacking. Its packaging cost is low and efficiency is high. It can be used in unmanned production lines or as a standalone machineOperation.

This device can also be connected to front-end equipment such as palletizers for automation. At the same time as the equipment is working, the product is in a stationary state, thereby minimizing potential hazards such as product tilting and detachment during the packaging process.The palletized goods are automatically transported to the center position of the winding machine through the conveyor line, and the machine automatically wraps according to the set parameters, automatically breaks the film, and automatically fuses (removes the tail).

，