XMTA-1000 Intelligent Digital Display Regulator-Global supplier

Product Groups

Liquid/Level Gauge

Liquid level series

Level series
Pressure gauge

Diffusion silicon pressure transmitter series

Monocrystalline silicon transmitter series

Capacitive pressure transmitter series
Temperature instrument

Special industrial use

thermal resistance

thermocouple
FLOW METER

Throttle device series

Electromagnetic flowmeter series

FLOW METER
Digital display instrument

Transmission module series

Digital Display Series

Firm Information

Transaction Level

VIP member
Contact
Phone
Address

299 Huahai Road, Jinhu County, Jiangsu Province

Contact Now

XMTA-1000 Intelligent Digital Display Regulator

The XMTA-1000 intelligent digital display regulator adopts self-developed and customized specialized integrated circuits commissioned from foreign int

Contact Supplier

More Products

Product details

Product Overview/Product overview----------------------------------------------------------◆◆

The intelligent digital regulator produced by our company adopts a self-developed and customized specialized integrated circuit produced by a Japanese integrated circuit manufacturer. It not only gathers most of the functions of various regulating instruments in current automatic control systems, but also integrates circuits such as CPU, I/O interface, EPROM, and D/A conversion. Coupled with a software system that draws on diverse strengths, carefully compiles, and repeatedly debugs, this instrument has the following characteristics:

1. The hardware of the instrument has been significantly reduced, and the composition structure of the system is relatively simple. Within the scope of user application, multiple input signals are compatible.

2. Adopting optimized design, the process has been significantly improved, without flying wires or adjusting potentiometers. All calibration and functions can be completed by software through the keyboard.

3. Up to six alarm outputs can be set, with more than ten alarm methods, and alarm parameters can be monitored.

4. Two optional D/A output ports can be added to provide optoelectronic isolation for both process and control variables, ensuring the safety and reliability of the controlled system. Provide two constant voltage sources, 5V and 24V, to meet the requirements of most auxiliary functions.

5. Any complex control, regulation, alarm, output and other functions can be easily operated by the instrument operator. After setting, they are password protected to make it a foolproof instrument, and the on-site operator will not be able to modify the locked parameters. It can even prevent operators from viewing. Four categories and hundreds of levels of anti-interference modes set by users themselves can adapt to various environmental interference sources.

6. Linear input or Pt100x instrument can customize zero and full scale.

Product selection/product selection-----------------------------------------------------------◆◆

Type spectrum		Remarks
type	XMTA	Intelligent digital display adjustment transmitter
	XMGA	Intelligent light column display adjustment transmitter
	1	1000 series digital display instrument
	2	2000 series light column instrument
Display mode	1	Single screen display
	2	Dual screen display
	3	Single screen+single light column
	4	Single screen+dual light pillar
	5	Dual screen+single light column
	6	Dual screen+dual light pillar
	7	Three screen display
	8	Square opening display (small signal cut off, please specify when placing an order)
Input method	0	Frequency signal: 1-10000Hz
	1	Equipped with thermocouples (E, K, S, B, J, T, N, R, etc.)
	2	Heating resistors (Pt100, Cu50, Cu100, BA1, BA2, G, etc.)
	3	Equipped with DC current (0-10mA, 4-20mA)
	4	Equipped with DC voltage (0-5V, 1-5V, 0-20mV, 0-50mV, 0-20mV)
	5	Equipped with remote transmission pressure resistance value and linear resistance value (0-400 Ω)
	6	Configure all input types
Alarm	0	No alarm
	1	Alarm all the way
	2	Two way alarm
	3	Three way alarm note: SP3 is used for sound and light alarm and associated alarm
	4	Four way alarm, please indicate
	5	Five way alarm
	6	Six way alarm
additional function	0	No additional features
	1	With broken couple, broken resistance, and status output after broken wire
External dimensions	H	Horizontal 160 × 80	Opening 152 × 76
	V	Vertical 80 × 160	Opening 76 × 152
	J	Horizontal 96 × 48 or vertical	Opening 92 × 45
	F	Method 96 × 96	Opening 92 × 92
	Q	Method 72 × 72	Hole 68 × 68
	S	Method 48 × 48	Opening 45 × 45
Transmission output	A	No transmission output
	B	Transmission output 0-10mA
	C	Transmission output 4-20mA
	D	Transmission output 0-5V
	E	Transmission output 1-5V
	F	Special signal transmission output
	G	Frequency output (5-10KHz)
Timing	S	Default is no timed function
		Equipped with timing function
External 24V DC power supply	P	Default is no 24V DC power output
		With 24V DC power output (can be used as a two-wire transmitter power supply)
communication interface	T	But it is not equipped with a communication interface
		Equipped with RS485 or RS232 communication interface
power supply	K W	Default is 220V. AC
		Switching power supply 85-260VAC
		Switching power supply 18-36VDC or 18-36VAC

Technical indicators/Technical indicators---------------------------------------------------------◆◆

1. Measurement accuracy: ± 0.5% FS ± 1d ± 0.2% FS ± 1d

2. Alarm functions: upper limit, lower limit, upper and lower limits, upper return difference, lower return difference, double return difference, OK mode, absolute value mode, etc.

3. Transmission output accuracy: ± 0.3% FS Load capacity: 0-600 Ω

4. Input impedance: 0-10mA: 500 Ω, 4-20mA: 250 Ω, DC. V: ≥ 200K Ω, thermocouple and DC. mV: ≥ 10M Ω, cold end automatic compensation accuracy within 0-40 ℃ range ± 0.3 ℃, thermal resistance: fully compensated within 3 × 10 Ω of three wire input, pulse amplitude: ≥ 2.5V, frequency range 0.01~1000Hz

5. Relay contact capacity: AC220V 3A (no inductive load)

6. Power supply: AC220V ≤ 6W

7. Work environment requirements: temperature: 0-50 ℃, relative humidity:<58%, no corrosive gases, no vibration in the environment.

Display explanation--------------------------------------------------------------◆◆

1. Single row digital display: directly displays instrument measurement values.

2. Double row digital display: The upper row displays the measured values. The lower row displays the set value. In the measurement state, the lower display can be switched to the percentage of the measured value by pressing the key.

3. Double row digital tube+single analog strip: The upper row displays the measured values. The lower row displays the percentage of set values or measured values, while a single analog bar indicates the percentage of measured values or simulated outputs.

4. Single row digital tube+double row analog bar: The digital tube displays the measured value of the instrument, and pressing the plus key can display the percentage of the measured value or the percentage of the analog output. The left row of analog bars indicates the percentage of measured values; The analog bar on the right row indicates the percentage of the set value or the percentage of the analog output.

5. Double row digital tube+double row analog strip: The explanation for double row digital tube is the same as above (display instruction 2), and the explanation for double row analog strip is the same as above (display instruction 4).

6. Indicator light: A light or J1 light, which is the SP1 alarm indicator light.

	The E light or J2 light is the SP2 alarm indicator light.
	B light or J3 light is the SP3 alarm indicator light.
	The C light or J4 light is the SP4 alarm indicator light.
	The light or J5 light is the SP5 alarm indicator light.
	The light or J6 light is the SP6 alarm indicator light.

Instrument wiring/Instrument wiring-----------------------------------------------------------◆◆

TABLE I

Table 2

Table III

Note: For special orders that differ from this diagram, the random wiring diagram shall prevail.

Table 4

Note: For special orders that differ from this diagram, the random wiring diagram shall prevail.

Instrument usage and maintenance/Instrument use and maintenance------------------------------------◆◆

1. Choose the appropriate instrument model and related programs as needed, so that users can use them without debugging or directly.

2. Due to the multiple functions of the instrument, the B menu operation program and wiring should be set correctly according to the working conditions. If necessary, it is recommended that the user send personnel to the manufacturer for learning.

3. If the instrument is damaged due to quality issues at the manufacturing plant, it will be repaired free of charge by the factory within one year.

Product packaging/Product packaging----------------------------------------------------------◆◆

Logistics Description/Logistics instructionss-------------------------------------------------------◆◆

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content