VIP member
1-port serial port server
1 RS-232/485/422 to Ethernet TCP/IP module, DIN rail installation, DC9~48V wide voltage power supply, distributed virtual serial port software, suppor
Product details
Product Introduction
ADM-5750It is a serial networking server device that converts between RS-485/422/232 serial port and Ethernet. Provide one standard 10/100M Ethernet port and one RS-485/422/232 three in one serial communication interface, which can be connected to devices based on serial communication, such as access control, attendance, food sales, one card system, POS system, building automation system, smart meters, water meters, self-service banking system, telecommunications room monitoring, power monitoring, power environment monitoring, remote decentralized equipment control, intelligent automatic alarm and fire linkage system, factory automation and other serial devices; Connect your serial device directly to the network. Make networking more convenient and efficient for you; Quickly transform your serial devices into network devices and exchange data with data collection servers through the network.
Product Features
1. Equipped with 1 RS-485/422/232 interface and 1 10/100M adaptive Ethernet port
2. Parameter configuration can be done through search tools, Telnet, and web browsers
3. Support virtual serial port, provide virtual serial port software, support 4 hosts to simultaneously open one serial port
4. Support TCP Server, TCP Client, UDP, Real COM virtual serial port mode, support pointsCommunication modes such as point-to-point and point to multipoint
5. TCP Server mode supports up to 4 connections, while TCP Client mode can connect to 4 target IPs or domainsName sends data
6. Supports ARP, TCP, UDP, ICMP, TELNET, HTTP, DHCP, DNS protocols
7. Support gateway and cross routing communication
8. Embedded 15KV ESD surge protection
9. Industrial 35mm DIN rail installation
10. DC9~48V wide voltage power input
Ethernet port characteristics
Standard: RJ-45, 10/100MbpsProtocol: ARP, TCP, UDP, ICMP, TELNETHTTP, DHCP, DNS and other protocols
Communication mode: 10M/100M adaptive, full duplex/half duplex adaptive
Working mode: Supports TCPServer, TCPClient, UDPReal COM virtual serial port
Interface cache: Sending and receiving 4K bytes each
Serial port characteristics
Number of serial ports: 1 RS-485/422/232 versatile serial portRS-232 signal DB9: TXD, RXD, RTS, CTS, GND
RS-485 signal terminal block: D+, D-
RS-422 signal terminal block: T+, T -, R+, R-
Test positions: None, Even, Odd, Space, Mark
Data bits: 6 bits, 7 bits, 8 bits
Baud rate: 300bps~230400bps
Traffic control: Supports RTS/CTS flow control or no flow control
Transmission distance: RS-232 cable<15 metersRS-485/422 cable<1000 meters
Interface protection: 600W surge protection, 15KV electrostatic protection
Environmental characteristics
Power input: DC9~48VPower consumption: DC12V @ 240mA (Max)
Working temperature: -20 ℃~75 ℃
Storage temperature: -25 ℃~85 ℃, 5-95% RH
Installation method: DIN rail installation
Size: 103x72x27 (mm), length x width x height (mm)
configuration method
1. Browser login to web server (default IP address 192.168.10.245)
2. SDS Configuration Management Tool for Search Configuration and Installation of SDS for DeliveryConfiguration tool software, clicking on "Search Devices" will display the searched serial ports in the device listServer, double-click on the list item to configure parameters, and finally save the settings.
3. Telnet device IP address (default IP address 192.168.10.245) for parameter configuration. inputThe number corresponding to the menu item can be configured for the device's parameters and saved.
Note: You can choose one of the above three methods to configure the serial server
Operation mode setting
1. When the serial server is set to TCP Server mode, the remote device should access and work in TCP Client.
2. When the serial server is set to TCP Client mode, the remote device should access and work on the TCP Server.
3. When the serial server is set to UDP mode, it operates in both Server and Client modespattern.
4. When the serial server is set to Real COM mode, the serial server operates in Server modeThe port is 6020, and the PC is equipped with virtual serial port software. The serial port server will automatically recognize the serial port parameters,Support on the fly.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-