Customizable production.

Instrument Introduction：

Ceramic fiber muffle furnace, with light weight, good insulation performance, and a maximum temperature of 1700 ℃ The heating rate is twice as fast as similar domestic products, which is very energy-saving, consumption reducing, and environmentally friendly. Compared with similar imported products: same quality, one-third price. It is the best choice to replace imported instruments. Value for money. The first domestically developed timed ceramic fiber muffle furnace with 40 stage programmed temperature control meets the customized needs of customers due to large sample sizes or long processing times for some special samples. (The time for samples to finish work in the afternoon or take a break at noon, with a pre-set program and automatic scheduled work. Samples can be collected directly at the designated time, greatly saving customer time and improving work efficiency. It has received unanimous praise from customers.)

Main features:

Control mode: The operation controller is integrated with the heating body, making the operation more intelligent and convenient, and the appearance more fashionable.

Accurate temperature control: Programmable PID controller, up to 40 segments of imported program temperature control, with adjustable timing for temperature rise, temperature holding, and holding time. The temperature reaches a basic level without overshoot, and the temperature fluctuation is small in the insulation state

Fast heating: The 1000 ℃ furnace model heats up from 100 ℃ to 1000 ℃ in less than 30 minutes

1700The furnace type is heated from 100 ℃ to 1700 ℃ in less than 90 minutes

● Steps: 32-50

● Lightweight: The average weight of the small furnace body is 55 kilograms

Good energy efficiency: 6L and 9L furnaces use 16A/220V standard power supply

20L、 30L furnace type adopts 16A/380V standard power supply

● Uniform temperature: The furnace wires are evenly arranged on both sides of the furnace cavity, and the heat is cross fired, with a temperature difference of ≤ 2 ℃

The furnace body is sturdy: high-quality steel plates with a thickness of 2mm are selected, and the steel plate thickness at the furnace door is as high as 5mm. The aluminum plate thickness at the anti deformation door is 8mm, fully ensuring the service life of the furnace body. (The first domestically adopted)

● Practical safety: This product has the function of automatically cutting off power when opening the furnace door

Product model: P-type

Technical parameters:

1Control method: PID

2Applicable power supply: AC220V

3Steps: 32-50

4Temperature control accuracy: 0.1% FS

5Range of insulation time setting: 999min/step

*6The operation controller is integrated with the heating body, making the operation more intelligent and convenient, and the appearance more fashionable.

*7Accurate temperature control. Programmable PID controller with up to 40 stages of imported program temperature control, adjustable for timed heating, temperature holding, and holding time. The temperature reaches a basic level without overshoot, and the temperature fluctuation is small in the insulation state

*8The heating rate is fast, and the 1000 ℃ furnace type heats up from 100 ℃ to 1000 ℃ in less than 30 minutes; The 1700 ℃ furnace model heats up from 100 ℃ to 1700 ℃ in less than 90 minutes

*9The weight is very light, with an average weight of 55 kilograms for the small furnace body

*10Good energy-saving performance, 6L and 9L furnaces use 16A/220V standard power supply; The 20L and 30L furnace models use 16A/380V standard power supply

*11The furnace wires are evenly arranged on both sides of the furnace cavity, and the heat is cross injected with a temperature difference of ≤ 2 ℃. The furnace wire can be replaced and supported by a corundum tube, with much greater uniformity than the muffle furnace in which the furnace wire is embedded.

*12Using high-quality steel plates with a thickness of 2mm, the steel plate thickness at the furnace door is as high as 5mm, and the anti deformation aluminum plate thickness at the door is 8mm, fully ensuring the service life of the furnace body. (The first domestically adopted)

*13It has the function of automatically cutting off power when opening the furnace door

*Note: The asterisks indicate the unique advantages of our company's products

1400Technical parameters of ℃ muffle furnace: (Equipment model:)MF0614P、MF0914P、MF2014P、MF3014P）