Product Introduction: AV1000A X-ray Fluorescence Sulfur Analyzer is a specialized X-ray fluorescence analyzer developed and manufactured to meet the needs of sulfur content detection in oil products. It adopts the principle of energy dispersion and is designed with an integrated electromechanical microcomputer for fast and accurate analysis. Its repeatability and reproducibility meet the relevant requirements of the national standard GB/T 17040, and also fully comply with the stricter requirements of the American national standard D 4294-03. It provides an important means for detecting sulfur content in crude oil or petrochemical production processes.

main purpose

1. Measure the total sulfur mass percentage content of crude oil, petroleum, heavy oil, diesel, kerosene, gasoline, and naphtha;

2. Measure the total sulfur content in coal chemical products, such as primary benzene;

3. Measurement of total sulfur or sulfide content in other liquid or solid fine powder samples such as petroleum coke and asphalt.

Instrument Features

1. Integrated microcomputer design of instrument electromechanical system, 8-inch IPS capacitive touch screen, intelligent operation interface;

2. Wide variety of detection, wide detection range, fast analysis speed, and low consumption of standard samples;

3. Using the fluorescence intensity ratio analysis method, temperature and pressure are automatically corrected, and the carbon hydrogen ratio (C/H) can also be corrected;

4. The automatic diagnostic function of the instrument, which determines the working status and electrical parameters of the instrument;

5. Using disposable Mylar film sample cups can avoid cross contamination; The sample cup is made using multifunctional pressing parts, which are fast and convenient;

6. The instrument has a large data storage capacity, with default storage of 4096 content analysis results, 8192 counting measurement data, and 16 instrument calibration result data. The data can be queried or uploaded to a computer through an RS-232 serial communication port;

7. Automatically select the working curve and stabilize the peak;

8. The instrument has a serial communication RS-232 interface, and the content, counting, and calibration data can be uploaded to the computer;

9. Users can choose the measurement result unit, m/m% or ppm, to suit their habits

10. Embedded thermal printer, quiet and fast printing of content results.

11. Safe X-ray protection measures, with no harm to individuals or groups from ionizing radiation caused by X-rays.

Main technical indicators

1. Sulfur measurement range: 0.005%~6%;

2. Accuracy:<0.4347 X 0.6446 (X=average of two repeated test results);

Typical value: 10000ppm sulfur content sample, measurement data for 90 seconds, repeated 3 times, standard deviation<30ppm

<1.9182 X 0.6446 (X=average of two single, independent test results);

Typical value: 10000ppm sulfur content sample, measurement data for 90 seconds, repeated 3 times, standard deviation<500ppm

3. Sample size: 3mL to 5mL (equivalent to a sample depth of 3mm to 4mm);

4. Measurement time: 60, 120, 180 seconds, arbitrarily set;

5. Single sample automatic measurement, measurement times: 1, 2, 3, 5, 10 can be set arbitrarily, and the average value and standard deviation will be given at the end of the measurement;

6. Number of calibration curves: The instrument can store 10 calibration curves;

7. Working conditions: Temperature: 5-30 ℃; Relative humidity: ≤ 85% (30 ℃); Power supply: AC220V ± 20V, 50Hz/60Hz; Rated power: 50W;

8. Size and weight: 260mm × 460mm × 260mm; 11kg.