VIP member
Aging power supply system
Programmable DC electronic load is the new generation of DC electronic load from Yuanwo. It adopts high-performance chips, high-speed, high-precision
Product details
Product Features:
Adopting a transistor linear amplification circuit structure, the output is a pure and stable sine wave. After special processing, it has low harmonic components, no interference, high accuracy, and low noise;
Provide output voltage rise time setting;
High measurement accuracy, suitable for testing various waveforms with sinusoidal half waves and similar DC components of current;
Provide embedded intelligent PC monitoring system;
■ The starting angle of the waveform can be set (0-359 °), suitable for measuring the peak current of nonlinear loads;
Adopting advanced direct digital frequency synthesizer (DDS) waveform generation technology, with high frequency stability and good continuity;
■ Full range adjustable output voltage 0-150V, 0-300V, (0-600V optional) with a step distance of 0.1V;
Output frequency 45-120Hz (40-500 Hz optional), step pitch 0.1Hz;
■ Output current limiting function;
■ With 9 sets of memory, commonly used parameters (voltage V, frequency F) can be stored for easy retrieval during use;
■ Equipped with RS232C communication interface [IEEE488.2 (GPIB) optional], instruction execution time is less than 10mS;
Protection modes: overvoltage, overcurrent, overload, short circuit, current limiting, etc;
Provide readings of root mean square voltage, root mean square current, active power, frequency, power factor, peak current, etc;
For 100% off load loading, the voltage stabilization response time is within 2ms, the overload capacity is strong, and the instantaneous current can withstand 3 times the rated current;
Voltage, frequency, time, angle settings, digital key input, high accuracy;
This machine can perform 30 sets of different voltage, frequency, rise time, and running time settings at once, and can perform continuous 999999 cycle tests. The shortest running time can be set to 1ms, which can be used to simulate harsh mains power testing and achieve surge and notch functions;
Standard 19 inch chassis, suitable for cabinet installation.
Provide output voltage rise time setting;
High measurement accuracy, suitable for testing various waveforms with sinusoidal half waves and similar DC components of current;
Provide embedded intelligent PC monitoring system;
■ The starting angle of the waveform can be set (0-359 °), suitable for measuring the peak current of nonlinear loads;
Adopting advanced direct digital frequency synthesizer (DDS) waveform generation technology, with high frequency stability and good continuity;
■ Full range adjustable output voltage 0-150V, 0-300V, (0-600V optional) with a step distance of 0.1V;
Output frequency 45-120Hz (40-500 Hz optional), step pitch 0.1Hz;
■ Output current limiting function;
■ With 9 sets of memory, commonly used parameters (voltage V, frequency F) can be stored for easy retrieval during use;
■ Equipped with RS232C communication interface [IEEE488.2 (GPIB) optional], instruction execution time is less than 10mS;
Protection modes: overvoltage, overcurrent, overload, short circuit, current limiting, etc;
Provide readings of root mean square voltage, root mean square current, active power, frequency, power factor, peak current, etc;
For 100% off load loading, the voltage stabilization response time is within 2ms, the overload capacity is strong, and the instantaneous current can withstand 3 times the rated current;
Voltage, frequency, time, angle settings, digital key input, high accuracy;
This machine can perform 30 sets of different voltage, frequency, rise time, and running time settings at once, and can perform continuous 999999 cycle tests. The shortest running time can be set to 1ms, which can be used to simulate harsh mains power testing and achieve surge and notch functions;
Standard 19 inch chassis, suitable for cabinet installation.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-