Softened water treatment equipment is an integrated device that uses the principle of ion exchange to remove scaling ions such as calcium and magnesium from water. It usually consists of a controller, resin tank, and salt tank. The controller can be either an automatic flushing controller or a manual flushing controller. The automatic controller can automatically complete the cycle process of soft water, backwashing, regeneration, forward washing, and automatic replenishment of salt tanks. Resin tanks can be selected from fiberglass tanks, carbon steel tanks, or stainless steel tanks. The salt tank is mainly equipped with salt for resin cell and subsequent regeneration.

1、 Working principle

The hardness of water is mainly composed of cations such as calcium (Ca2+) and magnesium (Mg2+) ions. When the raw water containing hardness ions passes through the ion exchange resin layer, the calcium and magnesium ions in the water are replaced by the sodium ions in the resin. The resin adsorbs the calcium and magnesium ions, and the sodium ions enter the water. In this way, the water flowing out of the exchanger is softened water without hardness ions. As the exchange process continues, all Na+ions in the resin are removed and the exchange function is lost. At this time, NaCl solution must be used to regenerate the resin, replacing the Ca2+and Mg2+adsorbed by the resin. The resin re adsorbs sodium ions and restores its softening exchange ability.

2、 Product Features

1. High degree of automation and stable water supply conditions.

2. Advanced program control device, accurate and reliable operation, replaces manual operation, and fully realizes automatic conversion of various links in water treatment.

3. High efficiency, low energy consumption, and economical operating costs. Due to the reasonable overall design of the water softener, the exchange capacity of the resin can be fully utilized. The equipment adopts a jet type salt suction instead of a salt pump, reducing energy consumption.

4. The equipment has a compact structure, occupies a small area, saves infrastructure investment, is easy to install and debug, and is easy to use and operate.

Softened water system50 tons(As shown in the above picture)

Raw water hardness: ≤ 6mmol/L

Raw water turbidity: meets the national standard for tap water

Water hardness: ≤ 0.03mmol/L (compliant with GB1756-1996 standard)

Inlet pressure: 0.2-0.5MPa

Working temperature: 2 ℃ -50 ℃

Layout method: Single tank or multi tank parallel connection

Power supply: 220V, 50HZ

Control mode: fully automatic program control

Power consumption: 3-125W

Central air conditioning water

Boiler water

Rinse water

How much does the air conditioning softened water system cost?

(Specifications we can offer: 0.25T/H, 0.5T/H, 1T/H... 1000T/H, etc.)

Call to inquire：400-9969-506