sludge concentrationonline analysisceremony
Model No.: ZWYG-2087PW sludge concentration meter
Submerged installation of online sludge concentration meter
Automatic cleaning of sludge concentration meter
Sludge concentration meter online detector


Measurement principle:
The sludge concentration sensor is based on the combined infrared absorption scattering method. The infrared light emitted by the light source is scattered by suspended particles in the sample, and then converted into an electrical signal by a photodetector. After analog and digital signal processing, the sample is obtainedsludgeConcentration.
mainFeatures:

1. The sensor adopts dual beam infrared scattering photometry detection technology, which has good repeatability and stabilitySex;
2. applicationISO7027The standard method (infrared light scattering technique) can eliminate the influence of sample color；
3. Built in self diagnosis function to ensure accurate data；
4. Optional cleaning brush with automatic cleaning function, greatly reducing sensor maintenance；
5. Digital sensors with strong anti-interference ability and long transmission distance;
6. Standard digital signal output, which can be integrated and networked with other devices without a controller;
7. The on-site installation of sensors is convenient and fast, achieving plug and play functionality.

Typical applications:

1. Online monitoring of sludge concentration in various processes of sewage treatment plants;
2. Water and wastewater treatment processes in various industrial production processesSuspended solids (sludge concentration)Online monitoring.

Technical Specifications:

measurement range	0.01-20000 mg/L，0.01-45000 mg/L，0.01-120000 mg/L
measurement accuracy	less thanThe measured values±5%(depending on sludge homogeneity)
pressure range	≤0.4Mpa
flow velocity	≤2.5m/sThe8.2ft/s
calibration	Sample calibration, slope calibration
Main materials of sensors	fuselage:SUS316L + PVC(Normal version),SUS316LTitanium plating+ PVC（海水版）；ORing: Fluororubber; Cable:PVC
power supply	100-240VAC (50/60HZ)
output	3road4-20mA
relay	Set up three relays, program response parameters and response values
communication protocol	MODBUS RS485
Storage temperature	-15to65℃
Operating Temperature	0to45℃
size	Sensor: Diameter60mm*length256mm Transmitter:145*125*162mm(long*wide*tall)
weight	Sensor:1.65KG; Transmitter:1.35KG
Protection level	Sensor:IP68/NEMA6P; Transmitter:IP65/ NEMA4X
cable length	standard configuration10Meter cable, can be extended up to100rice