1、 Overview:

The BSG-II fiberglass acid mist purification tower is suitable for purifying acidic gases such as hydrochloric acid mist, sulfuric acid mist, hydrogen sulfide, alkali vapor, and chromic acid mist at room temperature. The acid mist waste gas is forced into the purification tower by the fan, and passes through the secondary spray and the packing layer. The waste gas and sodium hydroxide solution are fully contacted, absorbed and neutralized by gas-liquid two-phase reaction. After purification, the acid mist waste gas is discharged out of the room through the dehydration treatment.

2、 Characteristics:

BSG-II FRP acid mist purification tower has beautiful appearance, compact structure, corrosion resistance, aging resistance, high strength, high purification efficiency, small resistance, low energy consumption, convenient installation, maintenance and management. It is an ideal purification equipment in China at present. The purified acid mist waste gas is much lower than the national emission standard.

3、 Selection:

The BSG fiberglass acid mist purification tower models currently produced by Kangtai Company include 15 specifications: 1.5, 3, 5, 7.5, 10, 12.5, 15, 20, 25, 30, 35, 40, 45, and 50

1. When selecting equipment, the exhaust volume of the required purification space needs to be consistent with the equipment's processing air volume and the initial concentration of exhaust gas, otherwise it will not meet the requirements of exhaust purification environment.

2. The fiberglass acid mist purification tower produced by our company is resistant to general acidic and alkaline media. If the user has special requirements, they should be specified when ordering, and our company can process them specially; Users need to provide the composition of the exhaust gas, the concentration of each component in the exhaust gas, the temperature of the exhaust gas, the hourly exhaust volume and exhaust method of the exhaust gas.

3. When placing an order, it is necessary to specify the direction of the fan inlet and outlet, the angle of the air outlet, and the position of the water supply and sewage pipes to meet the design and installation requirements.

4. If users require fiberglass pipes for the front and rear pipelines of the acid mist purification tower, they must place separate orders. Non standard pipelines can be processed according to the design drawings, and our company offers preferential supply.

5. Our company handles packaging and shipping on behalf of the user, with packaging materials and shipping costs borne by the user.

6. BSG fiberglass acid mist purification tower - Users can install it themselves. Our company provides free installation drawings and telephone technical support for users, and can also provide paid on-site technical guidance for installation.

4、 BSG type purification tower, water pump, and fan installation foundation diagram instructions:

1. The concrete foundation of the purification tower requires a height of 200mm above the ground and a flat surface above the foundation.

2. The foundation requirements for water pumps and fans should be 100mm lower than the foundation of the purification tower, and the foundation should be flat on top.

3. The following data is for reference only, and the specific situation can be agreed upon according to the requirements of the design unit and the user.