Product Overview:

This machine is suitable for flame resistance testing of lithium batteries (or battery packs). Drill a circular hole with a diameter of 102mm on an experimental platform, place a steel wire mesh on the hole, place the tested battery on the steel wire mesh sieve, install an octagonal aluminum wire mesh around the sample, then ignite the burner to heat the sample until the battery explodes or burns out, and time the combustion process.

Meet the standards:

UL2272-2016,UL 2271-2013,GB/T 31241-2014,GB/T 18287 -2013,GB/T 8897.4-2008,YD/T 2344.1-2011,GB/T 31485-2015

Technical Specifications:

1. Control mode: button type

2. Burner: Bunsen burner, with an inner diameter of 9.5mm and a length of approximately 100mm

3. Flame application time: 0~999.9 seconds ± 0.1 seconds

4. Test circular hole surface diameter: 102mm

5. Experimental mesh screen: A mesh screen made of stainless steel wire with a diameter of 0.43mm (0.017 inch) woven into a US inch mesh with 20 grids

6. Flame mesh sieve height: 38mm

7. Octagonal mesh cover width: The distance between each side is 24 "(610mm), octagonal, and the eight sides are movable for easy replacement and disassembly

8. Octagonal mesh cover height: 12 "(305mm)

9. Octagonal cover material: aluminum mesh, composed of aluminum wire with a diameter of 0.010 inch (0.25mm) woven into a mesh with 16-18 grids per inch

10. Testing section: Made of stainless steel material, the box door is made of two layers of 5mm thick tempered glass, and the condition of the tested sample can be observed. The rear side is designed with an exhaust fan and an external exhaust interface is reserved.

12. Test protective compartment volume: 730x740x500mm

13. Combustion gas: methane or liquefied petroleum gas (to be provided by the customer)

14. Power supply: 1 #, 220V, 50/60Hz,

15. Equipment weight: approximately 100kg