1、 Characteristics:
Suitable for detecting torque values of non rotating bodies **The deflection angle is not more than 360 degrees.
1. Measure static torque;
2. It can measure both static torque and dynamic torque;
3. High detection accuracy and good stability;
4. Small size, light weight, easy to install;
5. Continuous measurement of forward and reverse torque without repeated zeroing;
6. The measured elastic strength is high and can withstand 100% overload;
7. Strong anti-interference ability;
8. The coupler part can be used independently of the secondary instrument, as long as a+15V power supply is sent according to the socket pin number, it can output a voltage signal or square wave frequency signal proportional to the torque.
2、 Working principle:
This model is a coupler for converting torque signals, which generates a 10V bridge voltage with tens of thousands of levels of accuracy within the transmitter using a 15V working voltage Supply the strain bridge for use, and the amplifier will detect the mV level signal detected by the strain bridge. Amplify into a strong signal of KmV level, and then send it to a V/F converter to convert it into a voltage signal output proportional to the torsional strain
3、 Technical indicators:
1. Range: 5-30000N. M (Range needs to be customized)
2. Working voltage: 15V
3. Accuracy: ± 0 ５%Ｆ•Ｓ
4. Output signal: 1-5V, including: 0 torque: 3V; forward full-scale: 5V; reverse full-scale: 1V
5. Socket number: ① Ground; ② +15V; ③ Torque.