1、 Characteristics:
1. When used in a normal environment, it can ensure that the internal level of the oven reaches Class 100
2. Full week argon welding, high temperature resistant silicone gel rupture, SUS304 # stainless steel electric heater, to prevent dust generated by the machine itself;
3. Imported SUS304 # Japanese made 800mm thick mirror stainless steel plate is used and cleaned with alkaline soda water to remove oil and dirt
Particle occurs when not baked;
4. After horizontally blowing air from the back to the front, it passes through the H.E.P.A Filter 24 '× 24' × 5-7/8 'device imported from the United States and is directed towards the front door
(Special air duct design) directional air supply, with a filtration efficiency of 99.99%, Class 100, Exhaust port: 3 'φ (with automatic opening and closing damper)

2、 Execution and compliance with standards
1. GB/T11158-1989 Technical Conditions for High Temperature Test Chamber
GB2423.2-1989 Test B

3、 Purpose:
Dust free industrial ovens are suitable for electronic LCD displays LCD、CMOS、IS、 Pharmaceutical, laboratory and other production and research departments.
Dust free industrial ovens can also be used for drying, heat treatment, aging, and other high-temperature tests of non-volatile and non flammable and non explosive materials.

4、 Product Technical Parameters
1. Name and model: Dust free oven HSCOL-2
2. Main technical indicators:
2.1 Dust free grade: Class 100;
2.2 Temperature range: 60~+300 ℃;
2.3 Temperature uniformity: 200 ℃± 3 ℃, 300 ℃± 4 ℃;
2.4 Temperature fluctuation: ± 0.5 ℃ (no load)
2.5 Temperature control accuracy: ± 0.1 ℃;
2.6 The oven shelf is in an active form.
2.7 Working dimensions: W600 × H600 × D500
Dimensions: W950 × H1510 × D1240
2.8 Power Supply: 380V, 50Hz, 7.5Kw

3. Box structure:
3.1 The oven is assembled from the box body, electrical control cabinet, electric heating and air duct system, with a reasonable structure and a beautiful and elegant appearance;
3.2 Full week argon welding, high temperature resistant silicone compression, SUS304 # stainless steel electric heating generator, to prevent the machine itself from generating dust;
3.3 Box Material: The outer box is made of SS41 # medium carbon steel plate treated with phosphate film salt and coated with two layers of anti gloss paint to prevent dust;
3.4 Inner liner material: Imported SUS304 # Japanese made 800mm thick mirror stainless steel plate is used, and it is cleaned with alkaline soda water to remove oil stains and avoid baking to produce PARTTICLE;
3.5 Medium bucket material: Imported SUS304 # Japanese made 800mm thick mirror stainless steel plate is used, and it is cleaned with alkaline soda water, degreased, and argon welded to prevent pollution.

4. Temperature control system
4.1 Adopting the Japanese OMRON E5A temperature controller, the controller features LED digital display and setting, PID automatic calculation, and film setting, with an accuracy of ± 0.3% FS;
4.2 Signal source: Imported CA induction rod made in Japan with a tolerance of ± 0.5%.
4.3 Output controlled component: SSR non-contact signal output.

5. Comprehensive security measures:
Leakage circuit breaker
Control circuit fuse device
Overtemperature prevention protection device
Electric heating overcurrent protection device
Motor overcurrent protection
Machine malfunction buzzer warning
Reverse preventer
Facade safety switch

6. Choose equipment:
6.1 Programmable thermostat
6.2 Six point temperature recorder
6.3 Tri color indicator light
6.4 Grille grill