Cronet CC-3428G 28 port rack mounted three-layer full gigabit industrial Ethernet switch-Global supplier

Product parameters

Cronet CC-3428GA series of rack mounted three-layer switches designed for strict industrial communication system requirements. The industrial Ethernet switch adopts a modular design and can be configured with up to 28 1000M switchesinterfaceAny combination of optical and electrical ports.Cronet CC-3428GThe switch provides rich functions: supports MR ring network protocol, compatible with STP/RSTP/MSTP, port based VLAN, 802.1Q based VLAN, QoS, IGMP Snooping, broadcast storm suppression, port aggregation, port mirroring, port status management, etc. In terms of power supply design, the product can provide 2 power inputs for redundant backup use. The device complies with IEEE 802.3 and IEEE 802.3u standards, IEEE 802.3ab， And IEEE 802.3x specification. Cronet CC-3428G supports three-layer routing, multicast routing, IPv6 and other functions, and supports multiple management methods such as Console, Telnet, and Web, providing high-performance and highly reliable solutions for industrial communication. At present, it is widely used in backbone communication systems in industries such as rail transit, intelligent transportation, urban pipe corridors, electricity, energy wind power, and coal mines.

Product parameters

attribute	Cronet CC-3428G
interface	Supports 28 1000M unitsinterface,Any combination of optical and electrical ports
Ethernet port speed and distance	1O/1OO/1000Madaptive Twisted pair cable, maximum transmission distance 100m
Optical port properties and transmission distance	Single mode 1310nm, multi-mode 850nm; single mode 20km, multi-mode 550m (long-distance modules can be customized)
backplane bandwidth	64Gbps
Packet forwarding rate	41.7Mpps
Package cache area	12Mbit
MACoutside	Supports 16K MAC addresses
VLAN	Supports port based VLANs (4096), 802.1QVLAN Support GVRP
Layer 2 Ring Network Protocol	Support MR ring (self-healing time<20ms) Support STP/RSTP/MSTP
Self healing ring networking method	Support multiple self-healing rings Support tangent rings
Port Aggregation	Support static aggregation Support LACP dynamic aggregation
Routing redundancy technology	Support VRRP/VRRPv3
DHCP	DHCP Client DHCP Relay DHCP Server
IProute	Support static routing Support RIPv1/v2, RIPng Supports OSPFv1/v2, OSPFv3 Support BGP4, BGP4+for IPv6 Support policy routing
Port Mirror	Support streaming mirroring Support local mirroring
IPv6	Support ND (Neighbor Discovery) Support PMTU Supports IPv6 Ping, IPv6 Tracert, IPv6 Telnet, IPv6 TFTP
Multicast	Support IGMP Snooping v1/v2/v3, MLD Snooping v1 Support IGMP v3 Support PIM-SM, PIM-DM
QoS	Support limiting the rate at which ports receive and send messages Support CAR (Committed Access Rate) function Supports 8 output queues per port Support flexible queue scheduling algorithms that can be set based on both ports and queues simultaneously Supports three modes: SP, WRR, and SP+WRR
ACL	Support L2 (Layer 2)~L4 (Layer 4) packet filtering function, providing flow classification based on source MAC address, destination MAC address, source IP (IPv4) address, destination IP (IPv4) address, TCP/UDP port number
network security	Support user level management and password protection Support 802.1X authentication Support Radius authentication Supports port isolation Support dynamic ARP detection Support binding function for IP/Port/MAC
Management and Maintenance	Support FTP/TFTP loading and upgrading Support command-line interface (CLI) configuration Support Telnet remote configuration Support configuration through Console port supportSNMP v1/v2/v3 Support system logs, graded alarms, and debugging information output Support Ping
Storm suppression	Can control the broadcast, multicast, and unknown unicast rates separately
pilot lamp	Power indicator: PWR, interface light indicator: SYS, LINK/ACT, G25, G26, G27, G28
power supply	Input voltage: AC/DC85-265V Support power loss alarm function Support power anti reverse protection Industrial Phoenix Terminal Wiring
work environment	Working temperature: -40 ℃~+75 ℃ Storage temperature: -40 ℃~85 ℃ Relative humidity: 5% to 95% without condensation
Installation method	1URack
External dimensions	Width x Height x Depth: 482.6 x 44 x 340mm
protection grade	IP40Protection level, fanless design
MTBF	350,000hour
Warranty period	5year
Compliant with standards	IEEE802.3：CSMA/CD IEEE802.3i：10Base-T IEEE802.3u：100Base-T IEEE802.3z:1000Base-LX IEEE 802.3adLink aggregation IEEE 802.3xFull duplex Ethernet data link layer flow control IEEE 802.1pTraffic priority IEEE 802.1Q：VLAN IEEE 802.1wQuickly generate trees IEEE 802.1XPort based network access control
EMI	Electromagnetic interference level test
EMC	IEC61000-4-2(ESD)±8kV(contact),±15kV(air) IEC61000-4-3(RS) 10V/m(80MHz～2GHz) IEC61000-4-4(EFT) Power Port:±4kV;Data Port:±2kV IEC61000-4-5(Surge) Power Port:±2kV/DM,±4kV/CM; Data Port:±2kV IEC61000-4-6(CS) 3V(10kHz～150kHz); 10V(150kHz～80MHz) IEC61000-4-16(Common mode conduction: 30V (cont.), 300V (1s)

attribute	Cronet CC-3428G
interface	Supports 28 1000M unitsinterface,Any combination of optical and electrical ports
Ethernet port speed and distance	1O/1OO/1000Madaptive Twisted pair cable, maximum transmission distance 100m
Optical port properties and transmission distance	Single mode 1310nm, multi-mode 850nm; single mode 20km, multi-mode 550m (long-distance modules can be customized)
backplane bandwidth	64Gbps
Packet forwarding rate	41.7Mpps
Package cache area	12Mbit
MACoutside	Supports 16K MAC addresses
VLAN	Supports port based VLANs (4096), 802.1QVLAN Support GVRP
Layer 2 Ring Network Protocol	Support MR ring (self-healing time<20ms) Support STP/RSTP/MSTP
Self healing ring networking method	Support multiple self-healing rings Support tangent rings
Port Aggregation	Support static aggregation Support LACP dynamic aggregation
Routing redundancy technology	Support VRRP/VRRPv3
DHCP	DHCP Client DHCP Relay DHCP Server
IProute	Support static routing Support RIPv1/v2, RIPng Supports OSPFv1/v2, OSPFv3 Support BGP4, BGP4+for IPv6 Support policy routing
Port Mirror	Support streaming mirroring Support local mirroring
IPv6	Support ND (Neighbor Discovery) Support PMTU Supports IPv6 Ping, IPv6 Tracert, IPv6 Telnet, IPv6 TFTP
Multicast	Support IGMP Snooping v1/v2/v3, MLD Snooping v1 Support IGMP v3 Support PIM-SM, PIM-DM
QoS	Support limiting the rate at which ports receive and send messages Support CAR (Committed Access Rate) function Supports 8 output queues per port Support flexible queue scheduling algorithms that can be set based on both ports and queues simultaneously Supports three modes: SP, WRR, and SP+WRR
ACL	Support L2 (Layer 2)~L4 (Layer 4) packet filtering function, providing flow classification based on source MAC address, destination MAC address, source IP (IPv4) address, destination IP (IPv4) address, TCP/UDP port number
network security	Support user level management and password protection Support 802.1X authentication Support Radius authentication Supports port isolation Support dynamic ARP detection Support binding function for IP/Port/MAC
Management and Maintenance	Support FTP/TFTP loading and upgrading Support command-line interface (CLI) configuration Support Telnet remote configuration Support configuration through Console port supportSNMP v1/v2/v3 Support system logs, graded alarms, and debugging information output Support Ping
Storm suppression	Can control the broadcast, multicast, and unknown unicast rates separately
pilot lamp	Power indicator: PWR, interface light indicator: SYS, LINK/ACT, G25, G26, G27, G28
power supply	Input voltage: AC/DC85-265V Support power loss alarm function Support power anti reverse protection Industrial Phoenix Terminal Wiring
work environment	Working temperature: -40 ℃~+75 ℃ Storage temperature: -40 ℃~85 ℃ Relative humidity: 5% to 95% without condensation
Installation method	1URack
External dimensions	Width x Height x Depth: 482.6 x 44 x 340mm
protection grade	IP40Protection level, fanless design
MTBF	350,000hour
Warranty period	5year
Compliant with standards	IEEE802.3：CSMA/CD IEEE802.3i：10Base-T IEEE802.3u：100Base-T IEEE802.3z:1000Base-LX IEEE 802.3adLink aggregation IEEE 802.3xFull duplex Ethernet data link layer flow control IEEE 802.1pTraffic priority IEEE 802.1Q：VLAN IEEE 802.1wQuickly generate trees IEEE 802.1XPort based network access control
EMI	Electromagnetic interference level test
EMC	IEC61000-4-2(ESD)±8kV(contact),±15kV(air) IEC61000-4-3(RS) 10V/m(80MHz～2GHz) IEC61000-4-4(EFT) Power Port:±4kV;Data Port:±2kV IEC61000-4-5(Surge) Power Port:±2kV/DM,±4kV/CM; Data Port:±2kV IEC61000-4-6(CS) 3V(10kHz～150kHz); 10V(150kHz～80MHz) IEC61000-4-16(Common mode conduction: 30V (cont.), 300V (1s)

Installation diagram

Ordering Information

PRODUCT MODEL	Specification parameters
Cronet CC-3428G	281000M interface, any combination of optical and electrical ports, Layer3 industrial Ethernet switch, rack mounted, input voltage AC/DC85-265V

Optional Accessories

PRODUCT MODEL		description
SFPmodule	ME-S2101	SFP with 10M/100M/1000M（RJ-45）
	ME-S2118-S	SFP 1.25G/1.0625G、 850nm LC 550m
	ME-S2123-S	SFP 1.25G/1.0625G、 1310nm LC 20km
	ME-S2123-S40	SFP 1.25G/1.0625G、 1310nm LC 40km
	ME-S2125-S80	SFP 1.25G/1.0625G、 1550nm LC 80km
	ME-S2123S-S	SFP 1.25G/1.0625G、 1310nm single fiber LC 20km
	ME-S2123S-S40	SFP 1.25G/1.0625G、 1310nm single fiber LC 40km
	ME-S2125S-S80	SFP 1.25G/1.0625G、 1550nm single fiber LC 80km

PRODUCT MODEL	Specification parameters
Cronet CC-3428G	281000M interface, any combination of optical and electrical ports, Layer3 industrial Ethernet switch, rack mounted, input voltage AC/DC85-265V

Optional Accessories

PRODUCT MODEL		description
SFPmodule	ME-S2101	SFP with 10M/100M/1000M（RJ-45）
	ME-S2118-S	SFP 1.25G/1.0625G、 850nm LC 550m
	ME-S2123-S	SFP 1.25G/1.0625G、 1310nm LC 20km
	ME-S2123-S40	SFP 1.25G/1.0625G、 1310nm LC 40km
	ME-S2125-S80	SFP 1.25G/1.0625G、 1550nm LC 80km
	ME-S2123S-S	SFP 1.25G/1.0625G、 1310nm single fiber LC 20km
	ME-S2123S-S40	SFP 1.25G/1.0625G、 1310nm single fiber LC 40km
	ME-S2125S-S80	SFP 1.25G/1.0625G、 1550nm single fiber LC 80km