Shenzhen Wanyi Technology Co., Ltd
Home>Products>Dust online monitoring system - dust detector
Dust online monitoring system - dust detector
Dust Online Monitoring System - ONETEST 100L Dust Online Monitoring System is a high-performance dust online monitoring system developed by Shenzhen W
Product details

Dust online monitoring system - dust detector


Dust online monitoring system - dust detectorSystem Introduction

The general principle of a particle counter is laser scattering particle measurement. Firstly, use the built-in vacuum pump of the particle counter to0.1CFM(cubic feet)/Minutes)/2.83 LPM(Rising)/Inhale external air at a speed of minutes and let it pass in front of the laser light source inside the particle counter. In clean air, laser propagates in a straight line; But when light shines on dust, it will scatter; Therefore, the size of particles can be determined by measuring the amount of scattered light (scattered light), in other words, the number of particles can be determined by measuring the amount of laser scattering, and the size of dust can be determined by measuring the amount of scattered light. Even though the design principles of all manufacturers' products are the same, there are still differences in product performance, including sample speed, flow rate, detector sensitivity, particle size range, particle counting channel, durability of laser diodes or laser diodes, light source lifespan, and particle counter selection required for particle size measurement.

Dust online monitoring system - dust detectorcharacteristic


1Customizable scope0-500ug/m³PM2.50-2000ug/m³(PM10)Simultaneously measuring temperature and humidity,

2Short stability time: approximately1minute;

3Optical principle, active inhalation sampling, faster response time;

4The structure considers aerodynamic principles and achieves automatic real-time sampling, which can be used online for a long time;

5Friendly design makes maintenance easier;

6Meet the national "Environmental Air Quality Standards" andWHOThe testing requirements for the numerical range specified by the World Health Organization's air quality criteria for particulate matter.


Dust online monitoring system - dust detectorcharacteristic

1Indoor environment and public open areasPM2.5Monitoring and control of particulate matter concentration

2ambient air qualityPM2.5Measurement and evaluation

3Hygiene forPM2.5Monitoring of dust

4industrySafety Production TargetingPM.25Monitoring and Control of Dust

5Determination of safety in other occasions

6Research on the Relationship between Dust and Environmental Air Quality

7Environmental governance, air purification energy efficiency assessment

8Dust monitoring in other research fields


Dust online monitoring system - dust detectorsystem composition

By monitoring the hostGPRSComposed of transmitters and cloud computing service platforms, customers can easily utilize computersIpadDirectly log in to the service platform via mobile phone to observe data, download data, and download curve change charts; And it can be installed withGPRSThe large screen of the receiverLEDThe display screen receives and displays data in real-time.



• Testing principle

1)Light source (gas laser, solid-state laser diode, high-intensity light);

2)Light detection system;

3)Sample flow system;

4)Electronic counter;

5)The general principle of a particle counter is laser scattering particle measurement;

• Technical parameters

ONETEST-100on line

measuring method Light scattering method

particulate PM2.5、PM10

Output rangePM2.5:0~500ug/m³

PM 10:0-2000 μ g/㎥

Data output (optional) Analog output 4-20mA

Digital Output RS-232

Heating controller 30-40 ℃, equipped with dehumidifier

resolution ±0.2μg/㎥

sensitivity 0.1μg/㎥

Particle size range 0.3μm〜15μm

internet traffic 1.0 LPM

Data upload 10 seconds (1 minute cumulative data)

IoT platform Ionwy1718.com (optional)

Working environment 14 ℉~86 ℉ (-10 ℃~50 ℃), 20~98% RH

storage environment -4 ℉~140 ℉ (-20 ℃~60 ℃), 98% ≤ RH

weight Body weight 5 kilograms

Dimensions (width x height x depth) 280mm x 448mm x 108mm (with entrance)

calibration Labco calibration system compliant with ISO-21501-4 regulations

Calibration Interval Once a year or less (ISO 21501-4)

OptionalTSPUltrasonic meteorological noise, wind speed, wind direction, rainfall, atmospheric pressure, ozone, nitrogen dioxide, sulfur dioxide, carbon monoxide

Application Case - Xixian Forest Park



Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!