The SS Geosub electric submersible pump is currently the most comprehensive single-stage DC sampling pump in the industry. All components are made of stainless steel, allowing the pump body to operate reliably under the most severe on-site conditions. The SS Geosub electric submersible pump can adjust the flow rate through a sampling controller during operation.

The sampling pump is portable, and the maximum sampling depth of the pump body itself is 60 meters, but the sampling depth can be expanded through a drop pipe accessory.

The sampling pump controller can be connected to an AC power source or a DC power source. The built-in sensing system allows users to accurately control the sampling flow rate of the pump. Using a 1000 watt gasoline generator, one gallon of gasoline can work continuously for 18 hours.

Application scope:

The flow rate can be controlled, allowing for sampling of groundwater from low flow rates (VOCs containing samples are not recommended) to high flow rates, and can be used for well flushing operations.

controller:

Equipped with short-circuit protection to ensure user safety

Digital LCD display screen

L button control

The built-in processor stores the parameters of each well

L can provide DC-AC converters, suitable for various power inputs

Technical parameters:

Output power range: 200-250 volts AC; 50/60 HZ 31 0 Watts； 1.3 amps rated load 230 volts AC

Output voltage: 0-46V DC @<300 W

Output current (at maximum voltage): ≤ 10amps

Operating temperature: -29 ° C to 38 ° C External ambient temperature

Humidity: ≤ 90%

Weight: 7.46 kg

L size: 41cm x 33cm x 18cm (L x W x H)

Output protection: 5A CB

Electric submersible pump:

Low flow sampling, 10 mL/min

Idle protection

Easy to clean

When sampling in deep water, it can be combined with a drop pipe extension accessory

We can provide portable winch components or fixed sampling components according to customer needs

Technical parameters:

Electric components

Maximum power: 2/3 horsepower

Maximum current capacity: 35 amps DC

Drainage connection: 1/4 "American standard spinal canal thread (including 3/8" pagoda)

Operating conditions

Minimum operating temperature: 34 ° F (1 ° C)

Maximum operating temperature: 176 ° F (80 ° C)

Pump head: 316 stainless steel, polytetrafluoroethylene, Viton ®

L Size&Weight (Pump&Motor)

Pump head size: 31 cm Lx4.5cm OD

Pump head weight: 1.8 kg