Structure of electronic dedicated constant temperature oven:
1. Material: The interior of the drying area is made of high-quality stainless steel plates welded together, and the outer shell of the box is made of A3 cold-rolled steel plates welded together
2. Framework and reinforcement: The box frame and reinforcement are welded with 5 # angle steel and 8 # channel steel
3. Box color: The outer shell of the box is polished and sprayed with computer gray flat paint, with a smooth and beautiful surface.
4. Box door: adopts a single door opening method, with load-bearing alloy hinges and rocker connecting the box body

Heating part of drying oven:
1. Heating element: Stainless steel electric heating tube, 6 pieces
2. Heating power: 2KW per unit, a total of 12KW
3. Installation position of heating tube: top of electric hot air drying oven

Drying oven blower section:
1. High power blower motor installed at the top of the box
2. There is an air inlet on the right side of the box and an exhaust outlet on the top of the box, both of which can be adjusted for air intake and exhaust volume
3. The wind turbine connected to the motor adopts centrifugal air volume, which has a large air volume

Advantages and scope of application of electronic drying oven:
Advantages: Adopting hot air circulation and electric constant temperature heating method, the temperature inside the box is uniform. The heating and blowing system is installed in the air duct of the oven, greatly improving the utilization rate of the box. Intelligent digital temperature control instrument, PID regulation, can achieve automatic temperature control and constant temperature function. Heating at 250 degrees Celsius to meet various heating needs of general customers.

Scope of application: This device is a professional oven for electronic products, which meets the drying, heating, and curing needs of various small electronic products. It can also be used for drying, tempering, preheating, shaping, processing, dehumidification of motors, communications, electroplating, plastics, hardware chemicals, pharmaceuticals, printing, PC boards, and powder materials, and is highly praised by users.

Structure:
The outer shell of the TX electronic special oven is made of A3 cold pressed carbon steel plate, and the inner shell is made of A3 cold pressed carbon steel plate, with surface coating. The space between the outer shell and the inner shell is filled with aluminum silicate fiber to form a reliable insulation layer. The heating tube is installed in the bottom air duct (or on both sides of the air duct), and the room temperature can be directly adjusted to 250 ℃.

Main technical parameters: