VIP member
Explosion proof dual point pressure switch CYDK-II
1、 Product Introduction: The explosion-proof dual point pressure switch CYDK-II uses high-precision pressure sensors as detection components and gener
Product details
1、 Productbrief introduction
Explosion proof dual point pressure switchCYDK-II uses high-precision pressure sensors as detection components and generates switch signals with high stability circuits to achieve continuous pressure measurement and switch control. This product has an explosion-proof shell, with two adjustable switch points, high precision, small hysteresis, fast response, stable and reliable performanceThe advantages of easy operation and simple and flexible installation.
This product is widely used forThe pressure control of gases and liquids in industries such as petroleum, chemical, machinery, hydrology, and power can be achieved through external intermediate relays for various control functions.
two Technical performance
measureCheng |
-100…0～35…100(KPa) |
0～2、20……60(MPa) | |
Overload pressure |
≤ 200%FS |
Measurement medium |
Compared to 316LStainless steel is compatible with gases and liquids |
Output signal |
Switching signal |
Relay load |
30V/5A DC 240V/3A AC |
Range of switch point setting |
The double opening point of the relay within the range can be adjusted arbitrarily |
Supply voltage |
12-36VDCThe calibration value is24VDC） |
Control accuracy |
≦± 0.5%FS |
Long term stability |
≤±0.2%FS/year |
Response time |
≤1ms |
Pressure interface |
M20×1.5Or customized by the user |
Explosion proof mark |
ExiaIIBT6 |
Protection level |
IP65 |
3、 Product Features
● Using pressure sensors
High precision, small hysteresis, fast response
Two adjustable points, reliable switch signal
Strong anti-interference ability and good long-term stability
● Adopting explosion-proof shell, easy to install
4、 Exterior structure:
5、 Product selection
CYDK-II |
Explosion proof dual point pressure switch |
||||||
G |
gauge pressure |
||||||
A |
Absolute pressure |
||||||
0~X (KPa or MPa) |
range |
||||||
J03 |
±0.3%FS |
||||||
J05 |
±0.5%FS |
||||||
C4 |
A set of switch signals |
||||||
C5 |
Two sets of switch signals |
||||||
C0 |
special |
||||||
M1 |
M20 × 1.5 external thread |
||||||
M2 |
G1/2 external thread |
||||||
M0 |
special |
||||||
F2 |
Direct cable outlet |
||||||
F5 |
Wiring terminal outgoing line |
||||||
F0 |
special |
||||||
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-