FLUKE DTX-10GKIT 10 Gigabit Copper Cable Test Kit

Discounted supply of DTX-10GKIT 10 Gigabit Copper Cable Test Package. Data centers with strict data transmission speed requirements have always been dominated by high-performance fiber optic links. Fluke Networks' DTX 10 Gigabit solution can verify the link performance of high-speed transmission using economical twisted pair copper cables. By utilizing Fluke Networks' 10 Gigabit Ethernet solution, in addition to conducting wiring certification testing on links up to 500 MHz, it also makes it possible to measure and evaluate external crosstalk parameters. The external crosstalk (AxTalk) test parameter measures the signal coupling between one cable and another cable in a twisted pair link. At a speed of 10 Gbps, AxTalk is a significant interference source due to the presence of high-frequency components up to 500 MHz in the signal, and the increase in crosstalk with the frequency of the transmitted signal. In addition, the AxTalk interference in the cable link (victim cable) is composed of a combined effect from all other cables (interfering cables) in the harness. As the number of cables in a bundle increases, it is inevitable to measure all possible AxTalk combinations.

The DTX 10G kit makes AxTalk's measurements no longer complicated. Using the 10G kit, the DTX cable certification analyzer can measure the crosstalk between all possible wire pair combinations in two links in approximately 30 seconds. These 'line to line' test results can be transmitted from the DTX host to the DTXAxTalkAnalyzer running ™ The certification of the external crosstalk performance of the software's PC adopts sampling techniques. The standard will define sampling requirements, for example, 10 * long links in the wiring will be tested as * * disturbed (victim) links, and the combined impact of all links in the harness on the victim links will be measured and calculated using power and test parameters. Fluke Networks' testing solution is the * * solution that makes these complex measurement processes possible, practical, and fast on site. The DTX 10G kit includes a set of communication modules that can be plugged into the DTX-1800 host and remote units. In addition, it also includes Windows based software for calculating AxTalk power and testing parameters, analyzing the combined impact of all interfering links on the victim link. This kit is suitable for channel testing and long-term link configuration. Discounted supply of DTX-10GKIT 10 Gigabit Copper Cable Test Kit