Introduction to fully automatic PCB laser coding machine equipment

The fully automatic PCB laser coding machine is specifically designed for engraving barcodes, QR codes, characters, graphics, and other information on printed circuit boardsmodel.
This equipment is fully automated and does not require manual operation during the production process. It can be used in conjunction with SMT production lines for online operation, as well as with automatic board loading and unloading unitsaccomplish
Offline workstation

The fully automatic PCB laser coding machine is specifically designed for engraving barcodes, QR codes, characters, graphics, and other information on printed circuit boardsmodel.stem or root of plants
The equipment is fully automated and does not require manual operation during the production process. It can be used in conjunction with SMT production lines for online operation, as well as with automatic upper and lower plate unitsaccomplishoffline
Workstation design

Maintenance and after-sales packaging of fully automatic PCB laser coding machine

When the machine is not working, the marking machine and computer power should be cut off. When the machine is not working, cover the field lens to prevent dust from contaminating the optical lens
2. When the machine is working, the circuit is in a high voltage state. Non professionals should not perform maintenance during startup to avoid electric shock accidents
3. In case of any malfunction of this machine, the power should be cut off immediately. If the device is used for a long time, dust in the air will adhere to the lower surface of the focusing lens, and lighter ones will lower
Low laser power affects the marking effect; Severe cases can cause the optical lens to absorb excessive heat and explode. When the marking effect is poor, careful inspection should be carried out on the polymer
Is the surface of the focal lens contaminated. If the surface of the focusing lens is contaminated, the focusing lens should be removed and its lower surface cleaned. Be particularly careful when removing the focusing lens,
Be careful not to damage or fall; At the same time, do not touch the mirror surface of the focusing lens with your hands or other objects. The cleaning method is to remove anhydrous ethanol (analytical grade)
Mix with ether (analytical grade) in a ratio of 3:1, use a long fiber cotton swab or lens paper to infiltrate the mixture, gently scrub the surface of the lower end of the focusing lens, and wipe each time
On the one hand, it is necessary to replace the cotton swab or lens paper once During the operation of the marking machine, do not move it to avoid damaging the machine Do not cover the marking machine
Stack or place other items to avoid affecting the heat dissipation effect of the machine.