Fully automatic asphalt mixture cutting and testing machine

Our company has decades of production experience and technology, coupled with the continuous innovation of dozens of development and research personnel, to bring generation after generation of products to the market and win high praise from customers. Based on the principles of "quality *", "service *", and "integrity *", our company has established long-term friendly cooperative relationships with thousands of enterprises.

1Fully automatic asphalt mixture cutting and testing machineTechnical specifications:

1. Power supply: 380V/50Hz 3-phase

2. Power braking device (208V/60Hz optional)

3. Saw blade diameter: 500mm

4. Cutting depth: up to 200mm

5. Cutting length: 450mm minimum

6. Gas supply: (fixed specimen) 700kPa min

7. Size: 1900 x 950 x 1700mm

8. Weight: 300kg

IIDetailed introduction:
This preparation system is designed for fast and precise cutting of specimens:
This system has a complete set of linkage devices to ensure the safety of operators:

When starting to cut the specimen, the saw blade will automatically advance, and after cutting is completed, the saw blade will automatically return to its initial position.
2. Operators can choose the most suitable cutting speed based on different specimens and production volumes.
3. When cutting prismatic specimens, the operator will control the pneumatic fixture to fix them, while when cutting cylindrical specimens, the manual fixture will fix them manually
4. A simple spacing device is installed at the position of the specimen, which can cut 50 * 62.5mm small beam specimens without measurement, and the size of other small beam specimens can also be applied.
5. The cylindrical specimen fixture can ensure that the damage to the specimen during cutting is minimized, and the specimen can be firmly fixed during cutting.
By using PVC pipes to protect cylindrical specimens, a more ideal cutting effect can be achieved.
7. Equipped with an electronic control pressure adjustment system for specimen position, it can ensure the cutting length (150mm) and parallel cross-section of the specimen.
8. The system is suitable for cylindrical specimens with a diameter of 100mm, and can quickly and accurately cut the length of the specimen (150mm)