Ginger specific field management machine

1、 Ginger specificGarden management machinePurpose and scope of use

l、 main purpose

This machine is mainly used for rotary tillage, land reclamation, soil loosening, trenching, soil cultivation, and ridge building in agricultural greenhouses and farmland.

2. Applicable scope

Mainly engaged in greenhouse operations, small plot operations such as vegetable fields, flower fields, orchards, paddy fields, and mountain slopes.

IIGinger specific field management machineThe main structure and working principle of

l、 Main structure and T-working principle

(1) Using an advanced low-speed engine as power, it is transmitted through a belt to the gearbox, and then changed speed through gears inside the gearbox

Directly transfer to the cultivation components, and replace different operating components to carry out various agricultural operations.

(2) Adopting a tension type clutch device, with forward gear, reverse gear, and fast/slow gear.

2. Characteristics

(1) Small size, light weight, good job stability, and the handle can be adjusted freely in height, left and right.

(2) The cultivation part is connected by pins, making it easy to replace.

3、 Main performance of ginger specific field management machine

Replacing the rotary tiller enables rotary tillage operations, while installing a trencher enables trenching and soil cultivation operations, fully demonstrating high efficiency, low energy consumption, high reliability, and strong adaptability.

4、 Ginger specificGarden management machineInstallation and adjustment

l、 Installation conditions and technical requirements

(1) Check for looseness of screws and other fasteners in various parts.

(2) Have lubricating oil been properly added to each part according to the instructions.

(3) Move the machine slightly and check for any abnormal sounds or areas of abnormal heating.

(4) When installing and using a rotary blade, the blade must be symmetrical on both sides.

2. Adjustment

(1) The handle can be adjusted up and down in four sections. Hold the adjusting handle tightly and adjust it to the appropriate position according to personal use. Release the handle to adjust

(2) Adjust the displacement of the handle turning, and the handle seat can rotate 360 degrees. Adjust to any angle according to the terrain conditions, turn to the appropriate position, and release the handle.

(3) Adjustment of clutch

A、 When the clutch is engaged, press the tensioner upwards into the pulley to tighten the belt.

B、 When the clutch is released, the tensioner does not press the belt tightly, causing slight contact between the belt and the transmission pulley without generating friction. At this time, the driving wheel rotates, and the driven wheel does not rotate with the driving wheel.

C、 A gap of about 1cm must be reserved between the clutch guide cables to avoid slipping caused by the tensioning wheel being unable to tighten the belt.