VIP member
HDGF-C non-woven fabric composite. Embossing machine
Purpose and characteristics: This machine is suitable for two-layer or multi-layer composite of roll shaped materials such as BOPP, PET, CPP, PVC, and
Product details
Usage and characteristics:
This machine is suitable forBOPP、PET、CPP、PVCComposite of two or more layers of roll shaped materials such as thin films, paper, glass paper, and aluminum foil with the same properties. The feeding rack and receiving rack of this machine both use independent dual arm dual station electric rotating frames. And equipped with dual photoelectric automatic tracking and correction system, Taiwan photoelectric hydraulic correction system,Automatic tension control system, independent constant temperature hot air circulation drying system, air top oven, adhesive coating on mesh roller,Pneumatic control of adhesive pressure roller and composite pressure roller.This machine has the characteristics of fast compound speed, low noise, low energy consumption, and low air pollution.
This machine is suitable forBOPP、PET、CPP、PVCComposite of two or more layers of roll shaped materials such as thin films, paper, glass paper, and aluminum foil with the same properties. The feeding rack and receiving rack of this machine both use independent dual arm dual station electric rotating frames. And equipped with dual photoelectric automatic tracking and correction system, Taiwan photoelectric hydraulic correction system,Automatic tension control system, independent constant temperature hot air circulation drying system, air top oven, adhesive coating on mesh roller,Pneumatic control of adhesive pressure roller and composite pressure roller.This machine has the characteristics of fast compound speed, low noise, low energy consumption, and low air pollution.
1.All feeding and receiving shafts are supported by inflatable shafts to facilitate quick replacement, uniform support, and accurate centering of the material roll.
2.Both the first substrate and the second substrate are made of'Optoelectronic automatic tracking'Automatic correction device.
3.The tension of the first unwinding, second unwinding, and winding is independently controlled by a set of automatic tension control systems.
4.The gluing method is quantitative transfer coating with a mesh roller; Pneumatic pressure roller; Pneumatic back pressure scraper, controlled by a separate motor to swing left and right during adhesive application.
5.The internal heat transfer oil of the large roller is heated to evenly heat the drum and save electricity.
6.The adhesive pressure roller and composite pressure roller adopt pneumatic pressure, and the pressure can be adjusted.
7.Adopting dual frequency conversion speed regulation technology and Panasonic frequency converter from Japan to ensure synchronous operation of all parts of the machine.
8.Air top oven, total length10The meter is divided into five sections, each of which is controlled by an independent cylinder to open and close. The guide rollers inside the oven are arranged in an arch shape, and a walkway and protective fence are installed on the side of the oven.
9.The oven is divided into five sections, and the temperature of each section can be independently controlled. External heating package for electric heating, with hot air blown into the oven by a fan.
10.The inner chamber of the oven adopts a hot air circulation structure, and the inner chamber material is made of stainless steel. The hot air circulation utilization saves energy; Install pre exhaust at the entrance of the oven to remove the initial volatile solvents and ensure safety by not involving the exhaust gas in the secondary circulation.
11.Install a swing arm at the entrance of the oven to automatically control the tension of the film in the oven section.
12.Installation at the outlet of the ovenE.P.CElectro hydraulic correction system.
13.All aluminum guide rollers of the whole machine are made of imported high hardening aluminum alloy guide rollers and have undergone dynamic and static balance treatment.
2.Both the first substrate and the second substrate are made of'Optoelectronic automatic tracking'Automatic correction device.
3.The tension of the first unwinding, second unwinding, and winding is independently controlled by a set of automatic tension control systems.
4.The gluing method is quantitative transfer coating with a mesh roller; Pneumatic pressure roller; Pneumatic back pressure scraper, controlled by a separate motor to swing left and right during adhesive application.
5.The internal heat transfer oil of the large roller is heated to evenly heat the drum and save electricity.
6.The adhesive pressure roller and composite pressure roller adopt pneumatic pressure, and the pressure can be adjusted.
7.Adopting dual frequency conversion speed regulation technology and Panasonic frequency converter from Japan to ensure synchronous operation of all parts of the machine.
8.Air top oven, total length10The meter is divided into five sections, each of which is controlled by an independent cylinder to open and close. The guide rollers inside the oven are arranged in an arch shape, and a walkway and protective fence are installed on the side of the oven.
9.The oven is divided into five sections, and the temperature of each section can be independently controlled. External heating package for electric heating, with hot air blown into the oven by a fan.
10.The inner chamber of the oven adopts a hot air circulation structure, and the inner chamber material is made of stainless steel. The hot air circulation utilization saves energy; Install pre exhaust at the entrance of the oven to remove the initial volatile solvents and ensure safety by not involving the exhaust gas in the secondary circulation.
11.Install a swing arm at the entrance of the oven to automatically control the tension of the film in the oven section.
12.Installation at the outlet of the ovenE.P.CElectro hydraulic correction system.
13.All aluminum guide rollers of the whole machine are made of imported high hardening aluminum alloy guide rollers and have undergone dynamic and static balance treatment.
Main technical parameters
|
Machine model
|
HDGF600C
|
HDGF800C
|
HDGF1000C
|
HDGF1200C
|
|
Maximum composite speed
|
150m/min
|
|||
|
Composite hierarchy
|
2 layers/time
|
|||
|
Maximum composite width
|
600mm
|
800mm
|
1000mm
|
1200mm
|
|
Total installed power
|
58kw
|
59kw
|
62kw
|
62kw
|
|
Total weight
|
6000kg
|
7000kg
|
7500kg
|
8000kg
|
|
Overall dimensions
|
10800×2200×3600mm
|
10800×2400×3600mm
|
10800×2600×3600mm
|
10800×2800×3600
|
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-