HDKZG-IIThe series of DC high-voltage generators are based on the new Chinese power industry standardsDL/T848.1-2004The new generation portable DC high voltage tester designed and manufactured according to the General Technical Conditions for DC High Voltage Generators. It is mainly suitable for conducting DC withstand voltage tests on high-voltage electrical equipment such as zinc oxide lightning arresters, power cables, transformers, generators, etc. in power departments, industrial and mining, metallurgy, steel and other enterprises.
Common configuration selection:
|
voltage level |
10kV |
35kV |
110kV |
220kV |
|
Common Specifications |
HDKZG-II (60kV/2mA) |
HDKZG-II (120kV/2mA) |
HDKZG-II (200kV/2mA) |
HDKZG-II (300kV/2mA) |
|
rated current |
2mA/3mA/5mA/10mA (optional) |
|||
|
rated voltage |
60kV |
120kV |
200kV |
300kV |
|
Voltage measurement accuracy |
Digital display meter ± (1.5% reading ± 2 words) |
|||
|
Accuracy of current measurement |
Digital display meter ± (1.5% reading ± 2 words) |
|||
|
ripple factor |
≤0.5% |
|||
|
voltage stability |
Random fluctuation, ≤ 1% when the power supply voltage changes by ± 10% |
|||
|
overload capacity |
The no-load voltage can exceed the rated voltage by 10% and be used for ten minutes The maximum charging current is 1.25 times the rated current |
|||
|
structural characteristics |
Epoxy fiberglass electrical insulation double pressure cylinder |
|||
|
Air insulation, no leakage concerns |
||||
|
Characteristics of the operation box |
High precision 0.75UDC1mA single touch button (accuracy ≤ 2%) The most suitable test for zinc oxide lightning arrester |
|||
|
Overvoltage protection adopts a toggle setting, which is clear at a glance |
||||
|
power supply |
Single phase AC 50HZ, 220V ± 10%, intermittent use, with a maximum continuous time of 10 minutes per use |
|||
