DLD7007 high-precision glass constant temperature water bathIt is a new generation of constant temperature water bath carefully designed and researched by our scientific research personnel. Drawing on the advantages of many similar products, it has the advantages of low noise, continuous operation, uniform temperature, stable and reliable performance, and simple operation. It adopts advanced CNC temperature display with high accuracy. The studio is made of glass material for easy observation. DLD7007 viscometer constant temperature water bath is widely used in chemical analysis, medicine and health, biological cultivation, scientific research and teaching, environmental protection, geological survey, precision measurement, marine research, soil analysis and other departments.

DLD7007 high-precision glass constant temperature water bathMain technical parameters:

1. Model: DLD7007

2. Temperature control method: digital automatic temperature control

3. Temperature range: Room temperature to 95 ℃

4. Water temperature fluctuation: ＜ 0.1 ℃

5. Power: 1000W

6. Studio volume: 300X300mm

7. Power supply: 220V 50Hz

8. Temperature control accuracy: 0.01 ℃

DLD7007usage method:
1. When using a glass constant temperature water bath, it is necessary to first add water to the pot according to the required capacity, but not lower than the height of the heating tube.
2. Connect the external power supply, turn on the power switch, and tune the desired temperature: ① Turn the temperature "Setting Temperature" selection switch to the setting end, adjust the temperature control knob, and the digital display shows the set temperature value; ② Turn the temperature "setting temperature measurement" selection switch to the temperature measurement end, and the actual temperature of the working water tank will be displayed digitally. (The yellow indicator light is on, indicating that the heater is working.)
3. Adjust the speed control knob to the desired speed.
4. After use, set the speed and temperature control knobs to the minimum value, turn off the power switch, and cut off the power.

DLD7007matters needing attention:
1. The casing should be properly grounded during use to prevent accidents;
2. It is strictly prohibited for various solutions to enter the control room to avoid damaging the host;
3. It is strictly prohibited to heat the water tank without water to avoid burning out the heating tube;
4. The mixing slurry must be submerged in water before it can work;
5. When the instrument malfunctions, please have an electrical technician check or notify our factory for repair.