Working principle of high-pressure mist humidifier:

The high-pressure micro mist humidifier is to pressurize the purified water to about 7MPa through the high-pressure plunger pump, and then transfer it to each high-pressure spray head through the high-pressure water pipe. The high-pressure micro mist nozzle sprays the water into the entire space as 3-15 microns of micro mist. The water mist absorbs heat in the air and changes from liquid to gaseous state, so that the space humidity is enhanced and the air temperature is reduced. This is the humidification and cooling process of the micro fog system.

Characteristics of High Pressure Micro Mist Humidifier Operation:

1. The entire humidification system has no air intake, no dust pollution points, and no blockages;

2. The entire humidification system has no vulnerable parts, ensuring long-term stable operation of the machine;

3. The spray has fine particles, especially clouds in the mountains, with excellent gasification diffusion effect and humidification effect;

4. Humidification capacity can be large or small. One plunger pump station can be equipped with 60-1200KG humidification spray unit.

(Note: The humidification amount of spray of each spray head is about 3-7KG/H, and each spray head can produce 5 billion droplets per second. The diameter of the droplets is only 3-15 microns, which is thinner than one tenth of a hair)

The finer the water mist particles, the higher the heat and moisture exchange efficiency between water and air, and the better the humidification effect of spray. High pressure micro mist humidifier is an efficient and energy-saving humidifier. It uses a high-pressure plunger pump to pressurize purified water to 7MPa, and then transfers it to a nozzle through a high-pressure water pipe. The water is atomized into particles of 3-10 μ m and sprayed out. Due to the extremely small water mist particles, such as clouds and mist in the mountains, the contact area between water and air is greatly increased, greatly improving the heat and humidity exchange efficiency between water and air. As a result, most of the water mist particles can absorb heat from the air and vaporize. The humidification efficiency is extremely high, and the humidification effect is very good. The humidified air can reach saturation completely.

High pressure micro fog humidification belongs to isentropic humidification, which means that there is no increase in air energy during the humidification process. During the humidification process, the humidity of the air increases and the temperature decreases; The electric humidification method is an isothermal humidification method that heats water to boiling and produces steam through electrical energy. During the humidification process, the temperature of the air remains almost constant, but its enthalpy value increases, which means that the humidification process brings about an increase in air energy. For internal heating factories, there is already a large amount of heat dissipation, so using the isentropic humidification method can greatly save energy!