Honeywell Impulse XP Single Gas Detector
XP single gas detector (detecting: H2S, CO, O2, SO2, NH3, CI2, NO2, HCN, H2)

Impulse XP is your * in every aspect. It provides complete detection performance for various toxic gases, is economical and durable, and users can replace sensors. The market demands that the new generation of single gas monitors be not only compact and exquisite. A tight and sturdy structure, easy operation, and easy maintenance are all essential. When the target gas is detected, XP emits a loud sound and super bright light alarm, attracting the user's attention. Faced with noisy environments, the standard configuration has a built-in vibration alarm function.

Impulse XP has reliable performance, accurate readings, and resistance to electromagnetic interference. In addition, Impulse XP also provides continuous display of gas concentration, TWA/SETL and peak holding functions, as well as two-level instantaneous alarm functions.

By using TempraSURETM temperature compensation and seismic resistance functions, as well as ReflexTM self checking protection and SureCellTM sensors, Impulse XP ensures higher accuracy and reliability in repeated measurements.

Easy to maintain, the built-in sensor compensation technology extends the time between calibrations to 12 months. The commonly used sensors have a lifespan of over 2 years, while the battery life is 3 years, reducing operating costs to * *. Easy replacement of batteries and sensors. Honeywell Analytics also offers a variety of service offerings to meet the needs of global customers.
Gas alarm point setting:
The Impulse XP has a two-level concentration alarm point setting, and also has an 8-hour exposure average concentration limit TWA and a 15 minute high exposure average concentration limit STEL alarm setting for toxic gases. Users can set the alarm points for Impulse XP according to local laws and regulations. The factory settings are as follows: (British Standard)
Gas type range * alarm point Level 2 alarm point TWA alarm point STEL alarm point
Oxygen 0-30% vol 23.5% vol 19.5% vol -------------
Carbon monoxide 0-1000ppm 35ppm 100ppm 35ppm 400ppm
硫化氢 0-250 ppm 10ppm 15ppm 10ppm 15ppm
Hydrogen 0-1000ppm 100ppm 500ppm -------------
Nitrogen dioxide 0-150ppm 3ppm 5ppm 3ppm 5ppm
氯气 0-50 ppm 0.5ppm 1ppm 0.5ppm 1ppm
Sulfur dioxide 0-150ppm 2ppm 5ppm 2ppm 5ppm
氢氰酸 0-100 ppm 5ppm 10ppm 5ppm 10ppm
氨气 0-100 ppm 25ppm 50ppm 25ppm 35ppm

Durable and sturdy casing
Small size and light weight
Sturdy, impact resistant, capable of handling various weather conditions
Equipped with crocodile clips - prevent accidental loss

Easy to use
Ready to use out of the box
Single key operation
Intuitive icons suitable for various languages
Users can make settings through the menu
Provide software simulation usage guidance

High definition backlit display screen
Continuously display gas concentration
TWA/SETL and two-level instantaneous alarm with peak holding
Display battery life, calibration, and self-test status

Effective gas alarm indication
The combination of alarm and backlight enhances the prompt
Unique 95 decibel dual audio alarm
Equipped with vibration alarm as standard

Reliable operation
When turned on or needed, the display screen, battery, sensors, and sound and light vibration alarm devices perform self checks
Using patented SureCellTM and ReflexTM sensor technologies
TempraSURETM temperature compensation and impact protection
Periodic flicker and sound prompts improve reliability.

*EMC/RFI performance
Getting close to a wireless phone or mobile phone will not cause false alarms
RFI anti worry performance exceeds strict industrial standards

Good cost-effectiveness
Includes a 2-year warranty
Sensor compensation technology enables calibration intervals of up to 12 months (H2S/CO only)
Replaceable sensors and batteries
The sensor has a lifespan of at least 2 years
The battery life is usually 3 years * (low battery warning)
Low initial and operational costs

Physical display