Product Overview:

This controller is a type of controller that can directly pump water for irrigation, with two modes available for users to choose from: soil moisture controller and timed control. The soil moisture sensor detects soil moisture in real time and uploads it to the controller. The controller will then compare the received soil moisture value with dry soil moisture/Wet threshold comparison: When the soil moisture is below the dry threshold, the pump is turned on to pump water for irrigation. When the soil moisture is above the wet threshold, the pump is turned off to stop irrigation and automatically control the soil moisture within the set range. Very suitable for landscaping, vegetable greenhouses, and farmland irrigation that require control of water pumps.

model	image	description
MS&P		Controllable: 1 soil moisture sensor 1 pressure detection 1 set of high and low liquid level switches 1 pump, requires pump relay connection AC power supply or solar power supply. If solar power supply is required, a 12V/20Ah lead-acid battery (included in the product) should be used This controller is an independent pump controller.

Product Features:

• controllable1A solar DC pump（50WInternal) or AC pump,1A soil moisture sensor,1A pressure gauge and high/Low level switch.

• A pressure gauge can be installed at the back end of the pump. Once the pressure exceeds the set range, the pump will be immediately forced to shut down to prevent damage to the pump or pipeline rupture caused by excessive pressure, as well as to prevent serious waste of water resources caused by pipeline rupture.

• Support real-time detection of water level in reservoirs or well water using liquid level switches to prevent empty pumping and protect the water pump.

• Users can choose according to their needsACOr powered by solar energy.

• Two control modes:Soil moisture control and timed control,Users can switch freely.

• Under humidity mode,Maximum irrigation time limit can be set,Prevent accidental watering; You can also set the allowed irrigation time period to avoid watering at inappropriate times and damaging plants.

• In timed mode,Two sets of watering intervals and watering cycles can be set to control irrigation; Maximum soil moisture limit can also be set,Prevent excessive watering in case of unexpected situations.

• Users can learn and do with just one click/Wet threshold,You can also manually adjust the set dry/Wet threshold.

• Users can manually open it on site/Turn off the pump,Facilitating the handling of relevant emergency events.

• When the environment reaches the set low temperature value, the controller will forcibly enter the low temperature protection state. Any set pump on condition will not turn on the pump until the temperature rises above the set value, and then the pump will be allowed to turn on according to the setting.

• LCDReal time scrolling display of current soil moisture on the screen,The set dry/Wet threshold,Control mode and pump status, etc.

Application Demo:

Note:

The recommended extension length for moisture sensors (except 005) is within 50 meters.