This irrigation controller can control one soil moisture sensor, one solenoid valve, and one pressure gauge. It automatically controls the opening/closing of the solenoid valve based on soil moisture and is used in conjunction with pipeline systems such as sprinkler irrigation, micro irrigation, and drip irrigation to achieve scientific irrigation. Once the user sets the dry/humidity value, the controller will automatically control the soil moisture to be within the set range
Within the scope, thus achieving optimal water conservation. And optimal irrigation ensures the optimal growth of crops.

Working Principle:

The soil moisture sensor periodically collects soil moisture data and sends it to the irrigation control host. The control host automatically analyzes and controls the solenoid valve on/off based on the received data, thereby achieving scientific water-saving and optimized irrigation.

Product Features:

1Using green energy solar energy as the power source, low-carbon and environmentally friendly, it is very suitable for outdoor installation and use.
2. By controlling soil moisture, automatic irrigation has been achieved with high precision, no soil selectivity, and low cost, making it convenient and reliable.
3. Equipped with a large LCD display screen, real-time scrolling display of real-time humidity, and pre-set control of dryness/humidity.
4. Users can set and fine tune the dryness and wetness control values, and a pressure gauge or pressure switch can be installed at the back of the valve to detect whether the solenoid valve is operating normally.
5. Manual valve switch, convenient for users to handle related emergency events.
6. Two timed irrigation modes and one soil moisture control mode, users can freely choose and program to limit the watering time period, avoiding damage to crops caused by inappropriate watering.
7. Moisture sensors can be inserted or deeply buried in the soil to meet the irrigation needs of different crops.
8. The shell is made of highly corrosion-resistant and UV resistant ASA material, with waterproof design.

Note:

The recommended extension length for moisture sensors (except 005) is within 50 meters.
The recommended length for the extension cable of the solenoid valve is within 20 meters.

Case Study:

Case 1:

Case 2:

Case Three:

Case Four: