Instructions for using plasma cutting machine

·The system upgrade adopts the USB upgrade method, which is convenient, simple, practical, and provides lifelong upgrade services;

·Parameter backup and parameter restoration;

·Supports four modes: oxygen gas, plasma, powder coating, and demonstration;

·Separate control of oxygen gas and plasma IO;

·Oxygen gas automatic high adjustment, two-stage preheating, three-stage perforation;

·Plasma arc voltage feedback, positioning feedback, automatic turn off arc voltage adjustment;

·Support edge cutting, which can reduce preheating time for thicker steel plates;

·According to the thickness of the steel plate, automatic speed limit can be set at the corner to effectively prevent overburning;

·Manually select the starting line or choose the perforation point;

·Display of dynamic/static machining graphics, zooming in/out of graphics, dynamically tracking cutting points in the zoomed in state;

·Equipped with power-off and breakpoint protection memory function;

·The "offset cutting" function can avoid the waste of boards caused by incorrect discharge calculation;

·Different management permissions and corresponding passwords can be set to protect the rights and interests of equipment manufacturers;

·Remote control that supports P2P mode or BCD (8421) and serial RS232 mode;

·Support laser point-to-point function;

·Support plasma dynamic perforation function;

·Statistics on processing piece rate, running time, perforation frequency, and other related information.

TECHNICAL INDEX

Number of control axes: 2-axis linkage

Control accuracy: ± 0.001mm

Coordinate range: ± 99999.99mm

**Pulse frequency: 200KHz; **Operating speed: 15 meters per minute

**Number of program lines: 80000 lines

**Single program: 4M

Time resolution: 10ms

System working power supply: DC+24V DC power input, power greater than 80W.

System working environment: Temperature range of -10 ℃ to+60 ℃; Relative humidity 0-95% without condensation

Drive arc voltage adjustment motor * * Power: 45W (note: only available with T system). If higher power is required, * * up to 200W can be optionally selected.

hardware configuration

Display: 10.4-inch 800 * 600 high-resolution 16 million color high brightness LCD screen

Memory: 64M SDRAM

User program space: 256MB

Main frequency: 400MHz system main frequency

USB: USB1.1 interface front, supporting at least 16GB USB flash drive

Keyboard: PCB film coated keyboard

Chassis: Fully made of steel structure, truly capable of preventing electromagnetic radiation, interference, and static electricity.

Junke CNC Military Quality is committed to creating welding and cutting equipment that small and medium-sized enterprises can afford and use