The integrated well water and river water purification equipment is a comprehensive water purifier device equipped with improved throat pipes, passing nets, folding plates, hydraulic reaction facilities, etc. It compactly and reasonably combines flocculation, clarification, and filtration processes, and can easily purify general surface water sources into domestic water that meets hygiene standards.

Overview of Integrated Well Water Purification Equipment:

Integrated river water purification equipment is a comprehensive water purifier device equipped with improved throat pipes, passing nets, folding plates, hydraulic reaction facilities, etc. It compactly and reasonably combines flocculation, clarification, and filtration processes, and can easily purify general surface water sources into domestic water that meets hygiene standards. It is mainly suitable for improving the quality of domestic drinking water in rural areas, towns, farms, military barracks, and small and medium-sized enterprises and institutions. It is also suitable for industrial water softening and desalination processes, as well as for the purification of nearly neutral production wastewater with the main purpose of separating and removing suspended solids and colloidal impurities in water. This water purifier is suitable for treating raw water with a general turbidity not exceeding 500mg/l, and the turbidity of the raw water can reach 1000mg/l in a short period of time. The turbidity of the effluent from the water purifier is less than 3mg/l, and the processing capacity of a single unit is 5-200m3/h.

Working principle of integrated well water and river water purification equipment:

1. Filtering process

The fluid flows out through the filter cartridge, and there is a pressure difference between the inlet and outlet water. As the filtration progresses, the pressure will increase, and when the pressure difference reaches the predetermined value, it will automatically clean. Different filters are suitable for different filtration accuracies.

2. Cleaning method

Adopting a suction scanner (driven by a 0.75KW motor), it spirals around the filter screen. The suction movement on the scanner sucks magazine particles and discharges them through discharge, with a cleaning time of 1-3 minutes.

3. Control system

The BL type filter is equipped with a differential pressure switch, which sends a signal when the differential pressure reaches the set value. Signal to activate the electric controller and initiate cyclic cleaning. The electric valve opens the discharge valve through hydraulic or air compression control.

The main features of the integrated well water and river water purification equipment are:

1. Strengthen flocculation process

This water purifier adopts a agitation flocculation process combining Komax pipeline mixing reaction and traditional hydraulic reaction, which creates favorable conditions for reducing alum and effectively clarifying in the inclined plate area, which is conducive to improving the effluent quality.

2. No moving parts

The polystyrene filter bead layer flushing uses a fixed jet flushing pipe supplied by a water pump, without moving parts, which simplifies daily maintenance and management work compared to rotary flushing equipment, and there is no possibility of water quality being contaminated by oil.

3. Easy to construct for loading and unloading

For the convenience of users' possible maintenance and cleaning work during long-term use, the connection methods of the top cover of the water purifier, Komax pipeline mixing reactor, and the jet flushing pipe section inside the water purifier all use flange and threaded connectors that are easy to install and remove.

4. Convenient user management

To meet the actual needs of intermittent operation for users, the pump should be stopped at night and the auxiliary flushing start pipe valve should be opened for a few seconds before resuming work in the morning to quickly resume normal operation. To prevent errors during installation and operation, different pipeline valve bodies and sampling pipes (locally) are painted with different colors to show obvious differences: clear water valve, flushing water valve, and clear water sampling pipe - blue; Primary filter water valve and sediment water sampling pipe - yellow; Sampling tube in reaction zone - brown; Mud discharge valve and reflux area sampling pipe - black.

5. Hygiene and rust prevention measures

The inner wall of the water purifier and the surface of each metal component inside the water purifier are coated with two layers of non-toxic rust prevention to ensure water quality safety.

Application scope of integrated well water and river water purification equipment:

The scope of use includes river water, lake water, reservoir water, pond water, and well water that requires deep treatment. It can also be applied to certain industrial water treatment. Its turbidity is suitable for temperatures below 1000 degrees, and if paired with a high-speed sedimentation device, its source water turbidity can be relaxed to around 5000 degrees.