Jiuchuang JC-KT-ZN01 Large Intelligent Remote ControlEngineering Installation

Precautions

1. When installing the smart air conditioning remote control, it is necessary to integrate the transmitter of the smart air conditioning remote control with the infrared receiving area of the air conditioning

Align the quantities in parallel, without any objects obstructing the middle.

2. During installation, the distance between the smart air conditioning remote control and the integrated air conditioning receiving area must not exceed10m.

Installation method

on a458 Overall, there are many options to hang on32 Taiwan485 The actual number of devices is related to the bus driver capability.

image 4Application Method 1

image5Application Method 2

Jiuchuang JC-KT-ZN01 Large Intelligent Remote Controltechnical indicators

Jiuchuang JC-KT-ZN01 Large Intelligent Remote ControlEngineering debugging and testing

Comes with remote control

JC-KT-ZN01 Intelligent Air Conditioning Remote Control Price

When the air conditioner comes with a remote control to remotely control the air conditioner switch, it is completed by the "on/off" button. Press the 'On/Off' button once to send

Press the "power on" command for the air conditioner again to send the "power off" command, and cycle alternately.

The functions of cooling, heating, dehumidification, and automatic are completed by the "mode" button. Press this button once to send the 'cooling' command

Press the button for the second time to send the "heating" command, press the button for the third time to send the "dehumidification" command, and press the button for the fourth time

This button sends the "Auto" command. Pressing this button for the fifth time will send the "Cooling" command again, entering a new cycle (the order of cycles may vary for different remote controls).

When sending cooling, heating, or dehumidification commands, temperature information (16-30 ℃, temperature range of different air conditioners) should also be included

There is a slight difference in circumference. In addition to setting the mode to "cooling", "heating", or "dehumidification", you can also press the "heating" or "cooling" button to issue a combination command for the corresponding temperature. To cool down to 16 ℃, first set the mode to "cooling" and continuously press the cooling button until it displays 16 ℃. Press the cooling button again to send the "cooling 16 ℃ command", because the lowest temperature can only be set to 16 ℃. At this time, press the heating button once to send the "cooling 17 ℃ command", and so on.

JC-KT-ZN01 Large Intelligent Remote ControlProblem Analysis

When encountering the inability to control the air conditioning after learning, it may be caused by the following reasons:

1. Installation issues. Due to improper angle or distance during the installation of the air conditioning remote control. Solution: Adjust appropriately

The angle and distance of the air conditioning remote control.

2. The location for learning and sending commands is incorrect. For example, what you are learning is cooling at 20 ℃, but what you are sending is cooling at 21 ℃.

Solution: Learn the command for that location again.

Sometimes I can't control it when sending commands, and sometimes I can control it again. One possibility is the installation angle and distance

Inappropriate, secondly, the command was not learned well. Suggestion: Adjust the installation angle reasonably. If there is no significant change,

Relearn the command.