Product Introduction

This product uses laser electrochemical integrated sensors to measure data information, such as oil fume concentration, particulate matter, and non methane hydrocarbons in the fume hood.

Ministry of Environmental Protection

Hj2526-2012 Environmental Protection Product Technical Requirements Portable Food and Beverage Oil Fume Detector

GB 18483 Emission Standards for Cooking Fumes in the Hotel Industry

HJ 554 Technical Specification for Environmental Protection of Food and Beverage

HJ/T 62 Technical Requirements and Inspection Technical Standards for Oil Fume Purification Equipment in the Food and Beverage Industry

HJ/T 38 Measurement of Total Non Methane Hydrocarbons in Waste Gas from Fixed Pollution Sources

Product Features:

1. Synchronous measurement of seven parameters: oil fume, non methane hydrocarbons, particulate matter, noise, temperature, humidity, and pressure

2. Built in printer that can save inspection data at high speed

3. Built in lithium battery, can continuously detect for 4 hours on a single charge (within 10 minutes each time)

4. Long maintenance cycle (2-3 months), easy to remove oil stains and other consumables (excluding photocopy paper)

5. Installation operation of touch panel, with few parts and easy assembly, probe connection, machine preheating, and inspection within a few minutes.

6. Real time display of detection data, with a large touch screen that is easy to operate;

7. High measurement accuracy and good data reproducibility;

8. Display the average, maximum, and minimum values;

9. Automatically measure the flow rate of gas and calculate the amount of oil fume emissions;

10. Small size, light weight, easy to carry;

Product Technical Parameters

Oil fume detection range: 0-60mg/m3

Non methane total hydrocarbon detection range: 0-60mg/m3

Particle concentration detection range: 0-60mg/m3

Noise detection range: 25-130dB

Humidity range: 0-100HR%

Temperature: 0-120 ℃

Basic error: ± 0.2mg/m3; Or ± 3% FS

Dimensions: 35 * 27 * 15cm

Power supply: Built in lithium battery, charging power supply AC220V ± 10%, 50HzV

Product factory configuration: main unit+accessory box (oil fume probe * 1, data cable * 1, probe connection cable * 1, charger * 1, printing paper * 5, instruction manual certificate warranty card * 1)