Wuqiao Wanxin Transmission is a manufacturer of screw elevators. Since its establishment, the company has been committed to the research and development of efficient transmission technology for screw elevators, providing customers with high-quality screw elevator products.

The LDSL screw lift produced by our company has the following characteristics:

1、 Overview of LDSL bevel gear screw elevator:

LDSL bevel gear screw lift is a basic lifting component with a load-bearing capacity of 2.5-50T. Compared with worm gear screw lift, the main advantages of worm gear screw lift are high efficiency, long service life, and easy adjustment of reduction ratio. At the same time, it has many advantages such as compact structure, small volume, light weight, wide power source, no noise, easy installation, flexible use, multiple functions, and high reliability. It has multiple functions such as lifting, landing, propulsion, and flipping, and can accurately control and adjust the height of lifting or propulsion according to a certain program. It can be directly driven by an electric motor or other power source. It can also be done manually. The LDSL series elevator has a maximum input speed of 500r/min and a maximum lifting speed of 2.7m/min. There are different structural styles, and the height is manufactured according to the user's requirements. This device is self-locking. After improvement by our company's technical department, its quality and performance can replace similar products imported from abroad.

2、 Application scope of LDSL bevel gear screw elevator:

This product can be widely used in various industries such as machinery, metallurgy, construction, water conservancy, chemical, medical, pharmaceutical, cultural and health. For example, heavy pressure fastening devices such as lifting tables, flipping devices, and plastic processing machines for mechanical processing; Installation and maintenance of climbing ladders and tool lifting frames, as well as locomotive maintenance lifting platforms; Adjustment of clearance between rolling mill tracks and adjustment of the feeding position of pipes or plates; Casting molds or concrete shapes; Used for adjusting electrodes and hot liquid casting in smelting; Templates for mobile devices and composite products in architecture, including adjustable windows, walls, enclosures, etc; In terms of cultural hygiene, the stage can be raised and lowered, the height of the swimming pool floor can be adjusted, and the height of the operating table can be adjusted; Gates and protective plates used in water conservancy for reservoirs; Used in scientific research for sports that cannot be adjusted manually. Specially suitable for large lifting platforms.

3、 Technical parameters:

1. Structural type:

The structural types of screw elevators are divided into:

Type 1- The screw rod rotates or moves axially simultaneously.

Type 2- The screw rod rotates and the nut on the screw rod moves axially

2. Assembly type:

The screw lift is divided into two assembly types for each structural form

Type A - The screw (or nut) moves upwards

Type B - The screw (or nut) moves upwards

3. Screw head type:

The screw head of Type 1 structural type is divided into four types: I (cylindrical type), II (flange type), III (threaded type), and IV (flat head type)

The screw head of Type 2 structural type is divided into two types: I (cylindrical type) and III (threaded type)

4. Specifications:

Divided by lifting force into eight types: 2.5, 5, 15, 20, 35, and 50 × 10KN

5. Transmission ratio:

Elevators are divided into two types based on lifting speed: normal and slow. Slow speed is represented by l, while normal speed is not labeled.

6. Protection of screw rod:

The protection of the screw rod of Type I elevator is divided into: basic type, anti rotation transformation (F), and type with protective cover (z)

The protection of type 2 elevator screws is divided into basic type and shielded type (z)

This standard specifies the main basic parameters, technical requirements, load-bearing capacity, and selection methods of the LDSL series bevel gear screw elevator. Mainly suitable for deceleration transmission of mechanical equipment in metallurgy, mining, lifting, transportation, petroleum, chemical, construction and other fields. Its usage conditions are: the angle between the two axes is 90 °; Worm speed not exceeding 1500r/min; The sliding speed of the indexing circle in the middle plane of the worm shall not exceed 16m/s; The operating temperature of the LDSL series bevel gear screw elevator is 0-40 ℃. When the ambient temperature is below 0 ℃ or above 40 ℃, the lubricating oil should be heated or cooled accordingly; The worm shaft can operate in both forward and reverse directions.