OMA-F-20 Fiber Laser Marking Machine

The machine adopts the internationally advanced IPG company's 20W pulse laser, equipped with imported high-precision, high-speed galvanometer scanning system and focusing system. The whole machine is designed to be fully enclosed, with natural air cooling and red light indication positioning function, completely achieving maintenance free operation.

The power and control parts of the machine are highly integrated, achieving one click on/off without complicated on/off button sequence. The plug-in adopts a 1-wire aviation plug, and the installation, debugging, and operation are very simple and casual, completely achieving a "foolproof" operation mode. And equipped with independent online interfaces, it is particularly simple and convenient to use in conjunction with production lines and assembly lines

Model 1

Appendix: Significant advantages of IPG fiber laser:

1. Single mode laser output, extremely high beam quality

2. The gain medium has a large surface area to volume ratio and does not require special heat dissipation treatment. It is naturally air-cooled

3. The inherent fully enclosed flexible optical path provides higher flexibility in the design of laser processing equipment

4. There are no optical lenses inside the laser, so there is no need to adjust the optical path, truly achieving maintenance free operation

5. Low requirements for the usage environment, with an average fault free working time of up to 100000 hours

6. Small in size, especially suitable for integration into production lines to achieve online operations

7. The energy consumption is extremely low, with only 105W at full load operation.

3、 Product Technical Specifications

Technical parameters of OMA-F-20 fiber laser marking machine:

Laser medium: Ytterbium doped fiber

Laser center wavelength: 1064nm

Laser output power: 20W

Modulation frequency: 20 kHz -200 kHz

Anti high reflectivity: equipped with a special optical isolator

Beam quality: 1.2 M00

Scanning speed: 0-12000 mm/s

Marking depth: 0.01 mm -0.2 mm (depending on the material)

Marking range: 110 mm × 110 mm (optional)

Marking line width: 0.01 mm -0.1 mm

Minimum character size: 0.1mm

Positioning accuracy: 0.01 mm

Input power: ≤ 400W

Cooling method: natural air cooling

Laser lifting stroke: 500 mm

Power supply: AC220V ± 10%, 50Hz

Continuous working time: 24 hours

Note: Equipment advantages

1. The equipment optical base is made of 10mm pure aluminum carved and milled, and the fiber laser head is fixed inside without polarization caused by thermal expansion and contraction. And it has a strong overall aesthetic sense.

2. The whole machine is fully capable of "one click on/off", without complicated on/off sequences, and the operation is particularly simple, truly achieving "foolproof" operation of industrial laser equipment.

3. The marking software is a green laser marking software that does not require installation. It does not have any complex installation programs and can be directly called up on the computer for work marking. The setting of marking parameters is also on the same interface, making the operation simpler and more convenient. If the software is lost, it can be downloaded and copied directly to the industrial computer through our company's website.

4. Adopting a true industrial control computer with a "one click recovery" function, if the computer is damaged by viruses or other factors, it can be restored to its pre factory settings with just one click, which is quite convenient.

5. The equipment adopts a German digital galvanometer scanning system, which has higher accuracy, faster marking speed, and higher stability.

5、 Product production indicators:

The manufacturing, inspection, and acceptance of products shall comply with the enterprise standard Q/WCT03-2000 of Zhangjiagang Ouma Spray Code Electronics Co., Ltd. The national standards referenced by this enterprise standard include:

GB10320 Electrical Safety of Laser Equipment and Facilities

GB7247 Radiation Safety, Equipment Classification, Requirements, and User Guidelines for Laser Products

GB2421 Basic Environmental Testing Procedures for Electronic Products

GB/TB360 Specification for Laser Power Energy Testing Instruments

GB/T13740 Test method for laser radiation divergence angle

GB/T13741 Laser Radiation Beam Diameter Testing Method

GB/T15490 General specification for solid-state lasers

GB/T15175 Testing methods for main parameters of solid-state lasers

GB/T13862-92 Laser Radiation Power Testing Method

GB2828-2829-87 Sampling Procedure and Sampling Table for Batch Periodic Inspection by Count

At the same time, the following relevant national standards should be referred to:

GB/T 5226.1 Industrial Machinery Electrical Equipment Part 1: General Technical Conditions

GB/T 10435 Hygiene Standard for Laser Radiation in Workplaces

GB/T 13384 General Technical Conditions for Packaging of Mechanical and Electrical Products

6、 Equipment price and delivery cycle:

The price of OMA-F-20 fiber laser marking machine is 10000 yuan (including a 17% tax increase).

The delivery cycle of the equipment is 10-15 working days after the contract takes effect.

7、 After sales service:

1. The supplier is responsible for installation and debugging at the user's site. The supplier's technical personnel shall arrive at the user's location on time according to the user's requirements, and with the assistance of the user, carry out on-site installation and debugging until normal operation and qualified product identification are printed.

2. The warranty period for the product is 12 months from the date of self acceptance. Within 12 months, if equipment malfunctions or parts are damaged (excluding human factors and force majeure factors), the supplier shall be responsible for free repair, and the required replacement parts shall be provided by the purchaser free of charge. After 12 months, lifelong maintenance services will be provided for the equipment.

3. The supplier is responsible for providing relevant spare parts and components to Party A on a long-term basis, and the cost after the warranty period shall be borne by the user. And provide long-term technical consulting services free of charge.

4. The supplier is responsible for providing free technical training to user personnel. The supplier shall provide training for 2-3 operators and maintenance personnel from the demander, with a training period of no less than 2 working days. The training content includes graphic programming, laser principles, equipment construction, process instructions, equipment maintenance, laser safety protection, operating procedures, and simple troubleshooting.

5. The supplier can provide comprehensive solutions such as technology and processes free of charge according to the requirements of the demander. At the same time, provide free software upgrades, equipment modifications, replacements, and other upgrade services for devices.

The supplier has professional maintenance personnel responsible for technical services and repairs of the equipment, who can provide timely services.
6. The supplier shall arrive at the equipment site within 8 hours after receiving a repair call from the purchaser and resolve the equipment malfunction within 24 hours. If the fault cannot be resolved within 48 hours, the supplier will provide a machine of the same model free of charge to meet the production needs of the demander.