MODELthree thousand and eightyUsed for measuring in flue gas₂SO、_NOX、CO、₂O、₂CO、₄CHBy adjusting the gas concentration, one or more gas components can be measured according to the configuration, as well as measuring flue gas flow rate, temperature, pressure, and calculating combustion efficiency, excess air coefficient, total pollutant gas emissions, etc.MODELthree thousand and eightyIt can also be used as a temporary measure

CEMSThe system is used for online monitoring in the fields of boilers, power plant flue gas, and metallurgical industry.The measurement method complies with the relevant standards of the Ministry of Environmental Protection of China（HJ 629-2011、HJ 692-2014）And the United StatesEPAGermanyTü

VThe standard requirement is consistent with the heating sampling method of the continuous monitoring system for smoke emissions from fixed pollution sources using infrared method. The analyzer consists of a heating probe, a heating pipeline, a preprocessing system, and an infrared analyzer.

MODELthree thousand and eighty

It is a multi-channel, multi-component intelligent analytical instrument that uses infrared gas detection technology and has excellent stability, selectivity, and high sensitivity.applicationarea

Widely used for smoke monitoring of pollutants generated in thermal power plants, various industrial kilns, civilian heating boilers, waste incineration plants, steel plants, cement plants, and other industrial processes. Can be used for portable measurement of fixed pollution sources, online continuous measurement

CEMS Reference instruments and laboratory analysis.

Product Features •

Using cold atomic absorption spectroscopy, it has good selectivity, strong anti-interference ability, stability, and reliability •

Adopting non dispersive infrared measurement method, it has good selectivity, strong anti-interference ability, and long service life •The instrument has good seismic performance and can be used in vehicles•Unit automatic switching function（³ppm

give mg/m

） •5Adopting anti-corrosion design

• A shorter preheating time, approximately

minute •

Can use air to automatically calibrate the zero point •15It has functions such as automatic recording and storage, fault self diagnosis, data processing, data communication, printing, etc•Can continuously measure the measured concentration and converted concentration of gases in flue gas, and save them

Data related to the day above, data based on Excel5Table format storage1•Instrument everyReal time acquisition in secondsAccumulated average value, can be set to record storage period（5s

～ 60sAccumulated average value) and can print minute data•Comes withUSB

Interface, available U

Copy the detection data directly from the disk •The host adopts menu based operation, with a large color screen display that can show real-time, historical data, and curves³•The water removal system is suitable for flue gas with high humidity and low concentration (＜₂100mg/m）Smoke analysis under certain conditions,SO

Loss rate ＜ 3%

indicating value •The pre-treatment device can be used separately with a constant potential electrolysis instrument as a pre stage dehumidification device, which can effectively reduce the impact of flue gas humidity on sulfur dioxide monitoring_•Equipped with built-inNO₂XConverter, capable of convertingNOconvert to_NO, measurementNOXTotal emissions, conversion efficiency ≥_95%, selectable outputNO₂X

Measurement results of mass to volume ratio and concentration

NO count₂Technical Parameter•SO500：0³～～5000)mg/m

（ NDIR_）•NOX500：0³～～5000)mg/m

（ NDIR）•CO1000：0³～～

5000)mg/m （₂NDIR)0•CO：～2%～20%

（ NDIR₂）0•O：