Maipu MP128E is a high-speed baseband modem that can be used in various environments such as DDN networks, X.25 networks, and frame relay networks.

Functional features:

⊙ 0.4mm wire diameter transmission distance up to 6.5Km
⊙ Large scale network management
⊙ Pioneering baseband MODEM compatibility
⊙ Parameter following function
⊙ Loop testing function

Product Features

Further communication distance
When the wire diameter is 0.4mm, the maximum transmission distance can reach 6.5 kilometers;
When the wire diameter is 0.5mm, the maximum transmission distance can reach 8.5 kilometers.
Complete network management functions
⊙ Network management can be carried out through MaipuManager and MaipuAccessManger MaipuAccessManger network management system, and the network management interface is a Chinese menu graphical interface.
Easy to set up
⊙ Flexible DIP switch settings. The parameters, operating modes, and status of communication lines between the central and user ends can be controlled through network management.
Supports V.24 and V.35 interfaces
⊙ Flexible setting of V.24 and V.35 through buttons, without the need to replace circuit modules.
Loop testing function
⊙ Various loopback modes can be flexibly set through buttons.
Good compatibility
⊙ Compatible with similar baseband MODEMs such as Taiwan Union, RAD, LOOP, JNA, etc.
Software Download
⊙ Products can be upgraded through local or remote software downloads.

technical specifications

performance
1. DTE speed
Synchronization: 128K, 64K, 38.4K, 19.2K, 9.6K, 4.8K, 2.4Kbps
Asynchronous: 115.2K, 57.6K, 38.4K, 19.2K, 9.6K, 4.8K, 2.4Kbps
2. DTE interface: V.24, V.35
3. Line interface: 2-core passive twisted pair, RJ45 plug
4. Line code type: 2B1Q code
5. Line impedance: Balanced 135 ohms
6. Communication distance
When the synchronization rate reaches 128Kbps:
When the wire diameter is 0.4mm, the transmission distance is 6.5Km; when the wire diameter is 0.5mm, the transmission distance is 8.5Km
7. Clock
LT: Internal clock, external clock
NT: Loop clock, external clock
8. Testing
AL (local analog loopback), DL (digital loopback), RDL (remote digital loopback) tests can be set up

Power indicators

MP128E: Power input AC 220V, power consumption less than 2 watts;