VIP member
Metal mold laser drilling machine
The main advantage of the laser punching machine for mask meltblown fabric plate molds is its high punching efficiency. Laser operations do not cause
Product details
Introduction to Laser Drilling Machine for Mask Spray Fuse Board Mold
The non-woven fabric used in the production process of masks is processed using melt blown fabric sheet molds. The core component of the melt blown production equipment host is the spray head (spray plate), which is the mold
There are many spinning holes on the surface for the molten material to pass through, and their production and processing are crucial, affecting the production efficiency and quality of meltblown fabrics. These micropores are related to laser drilling
There are many spinning holes on the surface for the molten material to pass through, and their production and processing are crucial, affecting the production efficiency and quality of meltblown fabrics. These micropores are related to laser drilling
The function of the machine.
In general, the diameter of the spray holes on the meltblown fabric mold is 0.3-0.4 mm, and the spacing between the spray holes is 12-16 holes/cm. To achieve high protection
The protection requirements for the cover meltblown layer require the use of a laser drilling machine to drill holes in the mold, and then the finer the wire sprayed out through the holes on the meltblown cloth spinneret, the better.
Introduction to the application of laser punching machine for mask spray fuse board mold
The main advantage of the laser drilling machine for meltblown fabric fiber board is its high drilling efficiency, and the laser operation does not cause collisions between different materials, which brings intuitive benefits to enterprises
Good economic benefits; It can achieve a large aspect ratio and drill hole diameter of 0.3-0.8mm. It can be used on various materials such as hard, brittle, and soft; Suitable for quantity
Multiple and high-density group hole processing.
Introduction to the characteristics and advantages of the mask spray fuse board mold laser drilling machine equipment
Beyond Laser, this CY-ZK series equipment can achieve precision up to 0.2mm and produce high-quality micro holes. There is no need for post-processing such as extrusion grinding after processing,
The punching position is smooth and flat, and the produced spinneret has smooth wire output without blocking the holes, softer fibers, and better protection of the meltblown fabric. In this way, the meltblown produced
The fabric quality is better, which solves the problem of high-quality processing of melt blown fabric spinneret molds.
Introduction to the Configuration and Parameters of Laser Drilling Machine for Mask Spray Fuse Board Mold
Introduction to the manufacturer of mask spray fuse board mold laser drilling machine company
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-