VIP member
Microwave pigment drying equipment
The microwave pigment drying equipment is a belt dryer created by our factory, used for drying various sheet, strip, and granular materials, especiall
Product details
Microwave pigment drying equipmentIt was created by our factorybelt dryerUsed for drying various sheet-like, strip-shaped, and granular materials, especially suitable for materials that are not afraid of high temperatures; This series of belt dryers has the advantages of fast drying speed, high evaporation intensity, and good product quality. For dehydrated cake like paste like materials, they can also be dried after granulation or shaping into rods.
Paint dryer, colorcoal slime dryerPrinciple: The material is evenly spread on the mesh belt by the feeder and moved inside the dryer by the transmission device. The dryer consists of several units, each of which uses hot air to heat and dry materials. Water vapor is discharged from the top of the box by a dehumidification fan, taking away the moisture of the materials. The heating power can be freely adjusted according to the humidity of the material, and the dried finished product continuously falls into the feeder. The upper and lower loop units can be flexibly equipped according to user needs, and the number of units can also be selected as needed.
Pigment dryerTechnical parameters:
1. Microwave power: 30KW (adjustable)
2. Dehydration rate: 30 kg/hour
3. Power supply: three-phase five wire 380V
4. Microwave frequency: 2450 ± 50MHz
5. Height of inlet and outlet: 50mm
6. Belt width: 750mm
7. Transmission speed: 0-5 m/min
8. Drying temperature 80-120 degrees (adjustable)
9. Dimensions (length x width x height): approximately 10460 x 1362 x 1750mm
This microwave dryer is suitable for: pellet feed, monosodium glutamate, coconut milk, organic pigments, synthetic rubber, acrylic fiber, pharmaceuticals, medicinal materials, small wooden products, plastic products, electronic components aging and curing, calcium carbonate, white carbon black dyes, etc.
Due to the non-standard nature of the pigment drying equipment, the above parameters are for reference only. Please contact us directly for more information.
Paint dryer, colorcoal slime dryerPrinciple: The material is evenly spread on the mesh belt by the feeder and moved inside the dryer by the transmission device. The dryer consists of several units, each of which uses hot air to heat and dry materials. Water vapor is discharged from the top of the box by a dehumidification fan, taking away the moisture of the materials. The heating power can be freely adjusted according to the humidity of the material, and the dried finished product continuously falls into the feeder. The upper and lower loop units can be flexibly equipped according to user needs, and the number of units can also be selected as needed.
Pigment dryerTechnical parameters:
1. Microwave power: 30KW (adjustable)
2. Dehydration rate: 30 kg/hour
3. Power supply: three-phase five wire 380V
4. Microwave frequency: 2450 ± 50MHz
5. Height of inlet and outlet: 50mm
6. Belt width: 750mm
7. Transmission speed: 0-5 m/min
8. Drying temperature 80-120 degrees (adjustable)
9. Dimensions (length x width x height): approximately 10460 x 1362 x 1750mm
This microwave dryer is suitable for: pellet feed, monosodium glutamate, coconut milk, organic pigments, synthetic rubber, acrylic fiber, pharmaceuticals, medicinal materials, small wooden products, plastic products, electronic components aging and curing, calcium carbonate, white carbon black dyes, etc.
Due to the non-standard nature of the pigment drying equipment, the above parameters are for reference only. Please contact us directly for more information.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-