Product details:

◆Semi-automatic pneumaticsealing machineMain technical parameters

Equipment name: HalfAutomatic sealing machine-Pneumatic sealing machine

Model: BD-95Q

Power supply: AC220V/50HZ

Production:500-700Cup/hour

Sealing range: 50-200mm

Power: 900W

Dimensions: 400mm * 450mm * 1500mm

Temperature control range: 0-400 ℃

Gas source: 0.5mpa 0.5m3/min

Weight: 75kg

◆Characteristics and Applications of Semi automatic Pneumatic Sealing Machine

　　Wenzhou HuhuaMechanical research and development productionSemi-auto sealing machine-Pneumatic sealing machine is a machine that can manually fill, manually place boxes, automatically place films (or manually place films), and automatically complete sealing and film cutting functions. It can work continuously for 24 hours and has the characteristics of compact structure, easy use, simple maintenance, and high production efficiency. It can be widely used as a sealing film for paper food boxes, microwave food, takeaway cups, nylon, PP/PE/PS/OPS/PET and other material containers, as well as semi-automatic sealing for hot and cold cups, bowls and cups.

◆Working principle and structure of semi-automatic pneumatic sealing machine

Working principle: The whole machine is controlled by a microcomputer circuit, and all actions are completed by cylinders. All actions are divided into manual and automatic execution, so operation and debugging are very convenient. The sealing temperature has been pre-set by the temperature controller, and users can adjust it according to their actual situation.

Equipment configuration: The rack of this machine is welded with angle iron and other materials, and then wrapped with 304 # stainless steel after rust prevention treatment. The exposed parts are made of rust prevention treatment and stainless steel, aluminum, etc. The parts in contact with the materials are all made of 304 # stainless steel and aluminum parts, which fully comply with food hygiene standards.

Usage features: Can replace molds (can produce products of various specifications); Production can be controlled; The sealing size is within 240mm * 200mm.

◆Usage of semi-automatic pneumatic sealing machine

1. Connect the machine to the air source and turn on the air source to ensure a pressure of 0.65-0.85MPa;

2. Check the power switch and ensure that the manual/stop/automatic switch is in the stop position;

3. Insert the power plug into a single three wire socket of AC220V, ensuring good grounding;

4. Turn the manual/stop/automatic switch on the control panel to the stop position, turn on the power switch, and the power indicator light will be on at this moment;

5. Turn on the temperature controller switch, set the sealing temperature, and start heating the electric heating element. It takes about 10 minutes to reach the set temperature;

6. Wait for the hot stamping head temperature to rise to the set temperature (at this moment, the green indicator light on the thermometer is off and the red indicator light is on);

7. Turn the manual/stop/automatic switch to the manual position, and press any enable switch (sealing, cup feeding, film rolling) with your hand to turn on the corresponding indicator light. The machine will start executing the corresponding program;

8. Turn the manual/stop/automatic switch to the automatic position, and all other enable switches will not turn on (indicator lights will not light up). This is the stop state. If sealing or other functions are needed, turn on the corresponding enable switch (indicator lights will light up). When the product is sealed and sent out from the cup, check if the seal is secure and make appropriate adjustments according to the specific situation;

◆ Maintenance and upkeep of semi-automatic pneumatic sealing machine

1. Before starting up, lubricate all operating components once.

2. Before starting up, clean the sealing hot head thoroughly. To prevent any impact on the sealing effect.

◆Actual photo of semi-automatic pneumatic sealing machine equipment